Magnetic Propulsion-how can it only oscillate in one direction?

AI Thread Summary
Magnetic propulsion systems are discussed as potentially revolutionary, differing from traditional propulsion methods that rely on accelerating fuel. The initial oscillation of an electromagnet upon activation raises questions about why it consistently starts in the same direction. Despite the simplicity of the concept, there is skepticism regarding its viability and lack of successful implementation. Attempts to find credible sources explaining this phenomenon have been unsuccessful, leading to a consensus that the claims may not be valid. The thread has been closed due to the absence of reliable information.
Gabe21
Messages
60
Reaction score
0
I was reading about possible future propulsion systems and they all pretty much work by accelerating fuel back to produce forward thrust, accept for magnetic propulsion. Initially when you first turn on the current to an electro magnet there is a rapid oscillation that occurs until the magnet reaches a stable charge. I understand that. How its actually said to work is if you can turn the magnet on and off for half the oscillation period it will only oscillate in one direction producing thrust. My question is why does the magnet always start its oscillation in the same direction? The concept sounds way too simple not to have been perfected yet, so why hasn't it yet?
 
Physics news on Phys.org
Gabe21 said:
I was reading about possible future propulsion systems and they all pretty much work by accelerating fuel back to produce forward thrust, accept for magnetic propulsion. Initially when you first turn on the current to an electro magnet there is a rapid oscillation that occurs until the magnet reaches a stable charge. I understand that. How its actually said to work is if you can turn the magnet on and off for half the oscillation period it will only oscillate in one direction producing thrust. My question is why does the magnet always start its oscillation in the same direction? The concept sounds way too simple not to have been perfected yet, so why hasn't it yet?

The concept does not appear to make sense as described. Can you provide a pointer to a mainstream website that describes this?
 
Thread closed for Moderation; the sources in the HowStuffWorks article look to have problems.

If you can find any other sources, please PM them to me. Thanks.
 
No valid sources have been found, and the consensus is that this is BS. Thread will remain closed.
 
Thread 'Griffith, Electrodynamics, 4th Edition, Example 4.8. (Second part)'
I am reading the Griffith, Electrodynamics book, 4th edition, Example 4.8. I want to understand some issues more correctly. It's a little bit difficult to understand now. > Example 4.8. Suppose the entire region below the plane ##z=0## in Fig. 4.28 is filled with uniform linear dielectric material of susceptibility ##\chi_e##. Calculate the force on a point charge ##q## situated a distance ##d## above the origin. In the page 196, in the first paragraph, the author argues as follows ...
Thread 'Inducing EMF Through a Coil: Understanding Flux'
Thank you for reading my post. I can understand why a change in magnetic flux through a conducting surface would induce an emf, but how does this work when inducing an emf through a coil? How does the flux through the empty space between the wires have an effect on the electrons in the wire itself? In the image below is a coil with a magnetic field going through the space between the wires but not necessarily through the wires themselves. Thank you.
Back
Top