Marters in electrical engineering for metallurgical engineers

AI Thread Summary
A metallurgy graduate currently working in the power sector is seeking advice on pursuing a master's degree in electrical engineering. Recommendations include leveraging industry experience and strong professor endorsements for admission into an M.Sc. program. It is likely that admission may be granted on a probationary basis, requiring the completion of remedial courses. The discussion emphasizes that this guidance may primarily apply to Canadian institutions. Overall, transitioning from metallurgy to electrical engineering is feasible with the right approach.
MCA_BD
Messages
2
Reaction score
0
Hi,
i have a BSc. Engineering degree in metallurgy. At the moment I'm working in the power sector. So i'd like to do my masters in electrical engineering. Any idea how i can do that?
 
Engineering news on Phys.org
Try to gain admission into a M.Sc. program in EE on the basis of your industry experience / strong professor recommendation? If they let you in, they'd probably do so on a probationary status and make you take 'remedial' courses.

(This advice may only be applicable in Canada)
 
Thank you
 

Thread '3-terminal device external modeling'

Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
View full post »

Thread 'Question about the voltage between two charged capacitors'

suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
View full post »
Thread 'Weird near-field phenomenon I get in my EM simulation'

Thread 'Weird near-field phenomenon I get in my EM simulation'

I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
View full post »

Similar threads

Generating electrical energy using an intermediate reference frame
Replies
40
Views
3K
How are coils arranged in a power station generator?
Replies
8
Views
4K
Can Gyms Be Used to Generate Electricity?
Replies
1
Views
2K
Baseload Power
Replies
31
Views
2K
Self excited induction generators and grid connected solar inverters?
Replies
9
Views
2K
Upside down diffuser engineering
Replies
1
Views
1K
Antique electric railway maintenance equipment
Replies
1
Views
322
I need to interview an electrical engineer (School related)
Replies
1
Views
3K
Solenoid valve thermal part
Replies
24
Views
2K
DC Inverters and Rectifiers: Understanding the Terminology
Replies
8
Views
2K

Hot Threads

Recent Insights

Back
Top