Maximizing Your Chances of Passing the EIT: Tips and Advice

  • Thread starter Thread starter vptran84
  • Start date Start date
  • Tags Tags
    eit Tips
AI Thread Summary
To maximize chances of passing the EIT, thorough preparation is essential, including extensive studying and taking practice exams. Many find the morning session manageable, but the afternoon can be particularly challenging. Familiarity with the reference guide provided for the test is crucial, as it can save valuable time during the exam. Understanding its layout will help avoid confusion when searching for information. Proper preparation and strategy are key to success on the EIT.
vptran84
Messages
46
Reaction score
0
Hello all,

I'm about to take the EIT test this coming Saturday. If it is not too much trouble, can you guys give me some advice or tips on how i can maximize my chances of passing?

Thanks
 
Engineering news on Phys.org
study study study
 
If you haven't already, take practice exams. I thought the morning half wasn't too terribly bad, but the afternoon can be a bugger.

Also, they should have sent you a copy of the reference guide that you will be allowed to use in the test. Make sure you are very familiar with it's layout. You don't want to waste time trying to find something during the test.
 

Thread '3-terminal device external modeling'

Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
View full post »

Thread 'Question about the voltage between two charged capacitors'

suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
View full post »
Thread 'Weird near-field phenomenon I get in my EM simulation'

Thread 'Weird near-field phenomenon I get in my EM simulation'

I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
View full post »

Similar threads

A Anyone knows the slow light in EIT？
Replies
0
Views
2K
A What are the unusual absorption features observed in the EIT signal of 85Rb gas?
Replies
1
Views
1K
Can I become an EIT for a different discipline?
Replies
3
Views
3K
How Can I Design an Off-Grid Solar System with Panels on Multiple Roofs?
Replies
2
Views
1K
Music theory exam tomorrow - any last tips?
Replies
16
Views
335
Can I Claim EIT if I'm Certain I passed?
Replies
4
Views
3K
Help me make my first electronic device
Replies
10
Views
3K
Trying to get back into the swing of circuits
Replies
4
Views
2K
Physics Advice on pursuing physics faculty position
Replies
5
Views
1K
I Can basic concepts explain EIT, LWI, and STIRAP?
Replies
1
Views
1K

Hot Threads

Recent Insights

Back
Top