Maximum angle of acceptance - optical fibre

AI Thread Summary
The discussion revolves around calculating the maximum angle of acceptance for a laser experiment involving water and glass. The user initially calculated an angle of refraction of 52.49 degrees based on critical angles but felt more information was needed to determine the maximum acceptance angle. Clarifications were sought regarding the refractive indices of the materials involved, as the water acts as the core and glass as cladding. The critical angle between water and air was noted to be approximately 48.6 degrees, and the user eventually acquired the necessary refractive index data to proceed with their calculations. The conversation highlights the importance of understanding refractive indices and their role in determining optical properties.
Petra de Ruyter
Messages
24
Reaction score
1
Hi all

Tearing my hair out trying to calculate the Maximum acceptance angle for a problem. Experiment involved shining a laser into a tube of water. I have calculated the angle of refraction based on the average of two critical angles (one known and one measured manually) as 52.49 degrees. Asked to calculate the maximum angle of acceptance with just the critical and the angle of refraction. I am of the opinion that more information is needed, can someone please clarify.

Ive tried several geometric ways around this and can't get it?
Cheers
 
Science news on Phys.org
So, if I am not mistaken the water acts as the core and the glass as cladding? However you know that the core must have higher refractive index than cladding which is hardly achievable for such configuration (most glasses have higher refractive index than water).
Petra de Ruyter said:
52.49 degrees
Between which media did you get this value?
 
Air and water :-)
 
Petra de Ruyter said:
Air and water :-)
The critical angle between water and air is about ##48.6^o##, I wonder what are the known and measured values of critical angle with which you obtained that averaged value. Can you tell us?
 
53.00 and 51.98 The laser that was provided was pretty weak and the angles are a bit sketchy.

Cheers
 
Regardless of that peculiarity of the given value, the acceptance angle is calculated using ray optics. The ray diagram is illustrated in the picture below.
Numerical_Aperture_Angles_D1-780.jpg

You want to express ##\theta_a## in terms of ##\theta_c##. Clearly you need to know ##n_i##, ##n_f##, and ##n_c##.
 
What do you mean by critical angle?
 
Khashishi said:
What do you mean by critical angle?
Wiki will help you with this.
 
Maybe I should have said, how are you measuring the critical angle? And why can't you measure the acceptance angle?
 
  • Like
Likes sophiecentaur
  • #10
Hi there. I could not measure it because I did not have the refractive index, now I do and all is well. many thanks for all your assistance.
 
Back
Top