Mechanics Problem: Cart Velocity with Leaking Sand and Inclined Plane"

  • Thread starter Thread starter Trigger
  • Start date Start date
  • Tags Tags
    Mechanics
AI Thread Summary
The discussion focuses on solving a mechanics problem involving a cart losing sand while being pulled horizontally. The differential equation for the cart's velocity is derived using Newton's Second Law, resulting in F - kg = M dv/dt, where F is the pulling force and k is the rate of sand loss. When the pulling force is zero, the final velocity of the cart after all sand has leaked is determined through integration, yielding Vf = (Ft + C)/M. For a box sliding down an inclined plane, the equation of motion incorporates gravitational force and the rate of sand loss, expressed as mg sin(A) - kg = (M + m) dV/dt. The discussion highlights the application of fundamental mechanics principles to derive equations of motion in varying scenarios.
Trigger
Messages
11
Reaction score
0
Please help me out with the following problem. I have only just begun a mechanics course and am finding it extremely difficult!

(a)A cart with initial mass M and a load of sand 1/2M loses its sand at the rate k kg/sec. the cart is puled horizontally by a force F. Find the differential equation for the rate of change of the cart's velocity v in terms of k, M and F while there is sand in the cart?

(b)Suppose F=0 and the cart's initial velocity is Vo. What is the sand's final velocity when all the sand has left the cart?

(c)A box is filled with sand and is sliding down a smooth plane. The sand is leaking out at a constant rate. If the plane's inclination is A, what is the equation of motion of the box plus all the sand?
 
Physics news on Phys.org
Force= rate of change of momentum= d(mv)/dt

You probably know F= ma which is a special case when m is a constant.

In general F= d(mv)/dt= m(dv/dt)+ v(dm/dt).

(a) You are told that m starts out as (3/2)M but decreases at constant rate k:
m= (3/2)M- k and dm/dt= -k.

That means F= ((3/2)M-k)(dv/dt)- kv. That is the differential equation you want.

(b) Now take F= 0 and solve the differential equation for v(t). You will need to determine what t is when all the sand is gone.

(c) Almost the same as (b). The force directly downward is mg but you are on a plane with angle A. Can you find the "component of force" along the plane?
 



(a) To find the differential equation for the rate of change of the cart's velocity v, we can use Newton's Second Law, which states that the net force acting on an object is equal to its mass times its acceleration. In this case, the net force is the force F pulling the cart horizontally, minus the force of the sand leaking out, which is equal to the rate of change of the mass (k) times the acceleration due to gravity (g). So, the equation is:

F - kg = M dv/dt

(b) If F=0 and the cart's initial velocity is Vo, we can use the equation from part (a) and integrate it with respect to time to find the final velocity. The initial mass of the cart and sand is M + 1/2M = 3/2M, and since the sand is leaking out at a constant rate, the mass of the cart decreases at a constant rate as well. So, the equation becomes:

∫dV = ∫(F - k(3/2M))dt

Integrating both sides and solving for V, we get:

V = (Ft + C)/M

where C is the constant of integration. When all the sand has left the cart, the mass of the cart is just M, so the final velocity is:

Vf = (Ft + C)/M = (Ft + C)/M

(c) To find the equation of motion for the box plus all the sand, we can use the same approach as in part (a). The net force acting on the box and sand is the force of gravity pulling them down the incline, minus the force of the sand leaking out. So, the equation is:

mg sin(A) - kg = (M + m) dV/dt

where m is the mass of the sand remaining in the box at time t. We can also use the relationship between mass and volume to express m in terms of the density of the sand (ρ) and the volume of the box (V):

m = ρV

Substituting this into the equation, we get:

mg sin(A) - kρV = (M + ρV) dV/dt

This is the equation of motion for the box plus all the sand.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top