Mirror Image Problems in Electrodynamics

AI Thread Summary
Mirror image problems in electrodynamics primarily focus on simplifying the analysis of electric fields and potentials by using the method of images. This technique is particularly useful for problems involving grounded surfaces, allowing for the calculation of fields without directly solving complex boundary conditions. The uniqueness theorem in differential equations underpins this method, ensuring that solutions are well-defined under specific conditions. However, the applicability of mirror image problems is often seen as limited to specific geometries, raising questions about their relevance in broader contexts, such as energy considerations. Overall, the discussion highlights the method's utility while acknowledging its constraints in various scenarios.
heman
Messages
353
Reaction score
0
What do the mirror image problems in electrodynamics exactly focus at?
Are they only based on the uniquesness theorem ,which we study in Differential equations.!But i find their application to be limited since they can be applied to a surface which is grounded.!

One more thing ,how does it differentiates the problem of Energy.!
Your comments are honestly appreciated.!
 
Science news on Phys.org
Are you referring to the method of images?

Claude.
 
Thread 'A quartet of epi-illumination methods'

Thread 'A quartet of epi-illumination methods'

Well, it took almost 20 years (!!!), but I finally obtained a set of epi-phase microscope objectives (Zeiss). The principles of epi-phase contrast is nearly identical to transillumination phase contrast, but the phase ring is a 1/8 wave retarder rather than a 1/4 wave retarder (because with epi-illumination, the light passes through the ring twice). This method was popular only for a very short period of time before epi-DIC (differential interference contrast) became widely available. So...
View full post »

Thread 'Effective absorption coefficient of gold nanoparticles'

I am currently undertaking a research internship where I am modelling the heating of silicon wafers with a 515 nm femtosecond laser. In order to increase the absorption of the laser into the oxide layer on top of the wafer it was suggested we use gold nanoparticles. I was tasked with modelling the optical properties of a 5nm gold nanoparticle, in particular the absorption cross section, using COMSOL Multiphysics. My model seems to be getting correct values for the absorption coefficient and...
View full post »

Similar threads

I Image construction with concave and convex mirrors
Replies
4
Views
1K
Image formed from object at focal point of concave mirror
Replies
1
Views
3K
A The coherence length is much longer than the manufacturer claims
Replies
10
Views
2K
Light Reflection: Understand How Light Interacts with Materials
Replies
26
Views
5K
What are the key considerations for imaging with a condenser fresnel lens?
2
Replies
58
Views
7K
I Fabry-Perot Interferometer mirrors
Replies
7
Views
4K
Spoon Optics-Virtual Inverted image with a concave mirror
Replies
29
Views
33K
Optics for High Resolution Laser Imaging: Finding the Best Path
Replies
7
Views
2K
Collimated light from red dot scopes?
Replies
16
Views
3K
Method of mirroring - metal plates
Replies
11
Views
2K

Hot Threads

Recent Insights

Back
Top