How Long Until Mass Reaches 0.05m in Oscillatory Motion?

  • Thread starter Thread starter scan
  • Start date Start date
  • Tags Tags
    Motion
AI Thread Summary
The discussion revolves around calculating the time it takes for a mass of 0.2kg, suspended from a spring and initially pulled down 0.1m, to reach a position of 0.05m after being released. The spring constant is determined to be k=49, with a period T of 0.4 seconds and a frequency f of 2.5 Hz. To find the time, the equation x = -0.1 cos(2πt/0.4) is used, where x represents the distance from the equilibrium position. Participants emphasize the importance of including units when discussing period and frequency for clarity. The solution involves setting x to 0.05m and solving for t.
scan
Messages
23
Reaction score
0
ok here's the problem:

When a mass of 0.2kg is suspended from a spring, it stretches 0.04m. The mass is pulled down an additional distance 0.1m from its equilibrium position and released.

Question:

how long after being released is the posiiton of the mass equal to 0.05m
 
Physics news on Phys.org
Use the first statement to find the spring constant. Divide it by the mass and find its square root. That gives you the angular frequency and you should be able to take it from there.
 
Last edited:
Tide said:
Use the first statement to find the spring constant. Divide it by the mass and find its square root. That give you the angular frequency and you should be able to take it from there.


i've found all of those. there are several parts to this question. I've done them up to this question which I'm stuck on.

the constant k=49
period T= .4
frequency f= 2.5
 
If you have those then you should know that, taking x to be the distance from the equilibrium position, positive above, negative below, x= -0.1 cos(2pi t/.4). To answer the question "how long after being released is the posiiton of the mass equal to 0.05m", set x= 0.05 and solve for t.

By the way, do you understand that saying "period T= .4 frequency f= 2.5" doesn't mean anything unless you give the units?
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top