Efficient Gas Balloon Inflation: Tips and Ideas for a Safe and Quick Fill

  • Thread starter Thread starter seeker05
  • Start date Start date
  • Tags Tags
    Gas Project
AI Thread Summary
Filling a 7 ft balloon quickly poses challenges, especially when considering safety and efficiency. Using CO2 cartridges could be difficult due to the volume needed, requiring multiple cartridges that may not fit within the specified dimensions. An electric air pump is suggested as a safer alternative, though it may require a larger size than the compact dimensions provided. While a controlled explosion is an option, it is highly dangerous and not recommended for amateur attempts. Consulting with a professional for safe and effective balloon inflation methods is advised.
seeker05
Messages
1
Reaction score
0
:confused:

I need help finding the most feasible way to immediately fill a 7 ft latex (but preferably Mylar, and probably the shape of a football due to the inefficiencies of a sphere) balloon by using a system packed into a 6 W x 6 L x 1 H inch rectangle. And by immediate, I mean at half the speed of a car's airbag.

Should I use CO2 cartridges? If so how many grams? And how many cartridges?

Should I use some kind of controlled explosion? If so, any ideas? Please keep your ideas within the range of safety, and off the shelf parts.

Thanks!
 
Last edited:
Physics news on Phys.org
Using CO2 cartridges to fill a 7ft balloon would be extremely difficult. You would need to calculate the volume of the balloon, and then work out how much CO2 you would need to fill it. The size of the cartridge you would need would be quite large and would require a lot of cartridges to fill the balloon. A better option might be to use an electric air pump. It would take some time to fill the balloon, but it should be possible to do so at half the speed of a car's airbag. You may need to buy a larger pump than the one that comes in a 6 W x 6 L x 1 H inch rectangle, as this size is likely to be too small for the job.
 


Efficient gas balloon inflation requires careful planning and consideration for safety. One option for quick filling is to use CO2 cartridges, which can be easily packed into a small space. The number of cartridges needed will depend on the size of the balloon and the desired inflation speed. It is important to carefully read and follow the instructions on the cartridges to ensure safe usage. Another option is to use a controlled explosion, but this can be dangerous and should only be attempted by a professional with proper training and equipment. It is not recommended to use off-the-shelf parts for this type of inflation as it can be unpredictable and potentially hazardous. It is best to consult with a professional balloon inflator for the safest and most efficient method for your specific balloon. Safety should always be the top priority when inflating balloons, so please use caution and follow all safety guidelines.
 

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Similar threads

How Many Balloons Can Be Inflated from a Helium Cylinder?
Replies
16
Views
2K
Gas or liquid to adsorb an explosion
Replies
3
Views
2K
Can a balance accurately measure the mass of a gas in a balloon?
Replies
2
Views
16K

Hot Threads

Recent Insights

Back
Top