Newbie question regarding vacuum pump kill switch

AI Thread Summary
The discussion centers on upgrading a vacuum pump system to include an automatic shut-off feature when a specific vacuum level is reached. There are concerns about whether shutting off the pump would compromise the vacuum, as it could release the pressure. The user is currently using a hand pump and is unsure about the exact vacuum requirements. Suggestions include using an air-tight check valve in the vacuum line and exploring the use of a CPLD circuit for control. The conversation highlights the importance of maintaining vacuum integrity while automating the process.
agonydrum
Messages
12
Reaction score
0
I have a project that I've been working on for awhile and I've recently decided to try and upgrade parts of it. However, my knowledge on the subject is pretty sparse. What I want to do is have a vacuum pump which will shut off when my chamber reaches a certain level of vacuum. If anyone could point me in the direction of literature and or parts I will need I would really appreciate it.
 
Engineering news on Phys.org
Google vacuum pressure switch.

But do you really want to switch the pump off? Won't that release the vacuum? How much vacuum is it?
 
I don't have the exact vacuum i need on hand but it's not much, I've been using a sort of hand pump piston i made until now. Will it? I had assumed that the pumping chamber would be air tight and serve to hold the vacuum until i could seal the valve to the vacuum chamber.

Also would i be able to use a cpld circuit with that?
 
Last edited:
Air-tight checkvalve in the vacuum line would do it.
 
Thank you for your responses I'll check into to both of those suggestions.
 
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
Back
Top