A NMR Experiments: Why Do I Need a Broadband Probe Head?

AI Thread Summary
A broadband probe head is necessary for NMR experiments when dealing with multiple nuclei or varying field strengths, as it allows for the detection of signals across a wider range of frequencies. The resonance frequency and the impedance matching at 50 ohms are crucial for obtaining accurate signals. While a standard receiver may suffice for a single frequency, a broadband probe enhances versatility and signal clarity. The professor's insistence on using a broadband probe likely stems from these considerations. Understanding the need for such equipment is essential for successful NMR experimentation.
annaline19
Messages
2
Reaction score
0
Hello
I have to do an nmr experiement. Why do i need a broadband probe head? I have a magnet with 2 tesla. and modulation coils on it with a frequency of 50hz. For example i have a resonance frequency at 50mhz.
i hope you can pelp me.
 
Physics news on Phys.org
You shouldn't need a broadband receiver, just a receiver near the Larmor frequency. Are you using the probe for multiple nuclei or field strengths?
 
the idea is at resonance frequency the resistor is 50ohm. if something is into the probe head 50ohm it differs. and an nmr detector detects this and shows a signal.
the problem is my prof says i need it and i don't want to ask him again because i didnt understand it.
what can the reason be for a broadband signal? is the linewith always the same with this method?
 
annaline19 said:
my prof says i need it and i don't want to ask him again because i didnt understand it.
Um, that is part of your professor's job.

Again, are you using the same receiver for multiple nuclei or field strengths?
 
Last edited:

Thread 'The Physics of unloading sand from a barge'

I think it's easist first to watch a short vidio clip I find these videos very relaxing to watch .. I got to thinking is this being done in the most efficient way? The sand has to be suspended in the water to move it to the outlet ... The faster the water , the more turbulance and the sand stays suspended, so it seems to me the rule of thumb is the hose be aimed towards the outlet at all times .. Many times the workers hit the sand directly which will greatly reduce the water...
View full post »

Similar threads

I Relationship between nuclear magnetic physics and Maxwell's demon
Replies
1
Views
131
A Best coil design for homogeneus NMR RF pulse on liquid discs
Replies
13
Views
3K
B Question re photons/EM waves and the double slit experiment
Replies
7
Views
2K
I Probe absorption and dressed states
Replies
3
Views
2K
Can i cause NMR with a simple slayer exiter (Tesla coil)?
Replies
7
Views
3K
How to calculate gating time from the rate of the random coincidence?
Replies
1
Views
1K
Can C14 Atoms Be Detected Using NMR Despite 0% Natural Abundance?
Replies
1
Views
3K
NMR: Why do "identical" nuclei not couple with each other?
Replies
3
Views
3K
I In NMR, Why does longitudinal magnetization decrease when....
Replies
1
Views
2K
Biomedical Engineering: Scanning k-space in NMR with readout gradient
Replies
11
Views
2K

Hot Threads

Recent Insights

Back
Top