Olympic Kinematics Problem: Reaching the Goal in Time

AI Thread Summary
The discussion centers on a kinematics problem involving a football kicked at a velocity of 25 m/s and affected by a perpendicular wind of 10 m/s. Participants analyze how the wind impacts the ball's trajectory, noting that while it introduces a sideways deviation, it does not alter the forward velocity component. However, the wind's vertical effects could slow the ball's forward motion, complicating the calculations. The problem requires determining the time taken for the ball to reach the goal, located 32 m away, while accounting for these forces. Clarification on the wind's influence is key to solving the problem effectively.
KrolKuabV
Messages
1
Reaction score
1
Summary: Olympic problem from kinematics

Hello,
could anyone help me with the following problem? I don't quite get how exactly does it work.

After being kicked by a footballer, a ball started to fly straight towards the goal at velocity v = 25m/s making an angle α = arccos 0.8 with the horizontal. Due to side wind blowing at u = 10 m/s perpendicular the initial velocity of the ball, the ball had deviated from its initial course by s = 2 m by the time it reached the plane of the goal. Find the time that it took the ball to reach the plane of the goal, if the goal was situated at distance L = 32 m from the footballer.

This problem is from this PDF https://www.ioc.ee/~kalda/ipho/kin_ENG.pdf . Thanks for any help!
 
  • Like
Likes Jatin345
Physics news on Phys.org
As per PF rules you need to show your best attempt.

Hint: if the wind affects the ball in the transverse direction, what can you say about motion in the other directions?
 
PeroK said:
As per PF rules you need to show your best attempt.

Hint: if the wind affects the ball in the transverse direction, what can you say about motion in the other directions?

It is not affected(?)
 
RoloJosh16 said:
It is not affected(?)
It depends how you read this:
"side wind blowing at u = 10 m/s perpendicular the initial velocity of the ball,"
If you read that as meaning the relative velocity is perpendicular to the motion of the ball then, yes, it only exerts a sideways force, so does not affect the velocity component in the original direction. I.e., in the ground frame, the wind has the same forward velocity as the ball (25 cos(α)m/s), plus a 10m/s crosswind component.
This still does not quite work because the wind would still have a vertical relative velocity, vertically downward initially, vertically upward later. This will tend to slow the forward motion of the ball.
However, I don't think the author considered that it needs to be specified as relative.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top