Optics and Cameras: Why Does a Camera Get Wider/Longer?

  • Thread starter Thread starter poweroffive
  • Start date Start date
  • Tags Tags
    Cameras Optics
AI Thread Summary
A camera's design becomes wider or longer primarily to accommodate larger film or sensor sizes, which allows for capturing more detail and producing larger images. The relationship between lens size and image quality is influenced by diffraction; larger lenses minimize diffraction effects, enhancing image clarity. The confusion in the discussion stems from understanding how camera dimensions relate to image size and quality. Ultimately, a larger camera setup is essential for achieving higher resolution images. This design principle underscores the importance of lens and sensor size in photography.
poweroffive
Messages
5
Reaction score
0

Homework Statement



Why does a camera get wider/longer?


Homework Equations



N/A

The Attempt at a Solution



Well, I assume that it is to produce the largest image that can possibly be on the film. But I'm a little confused on the question as a whole? Am I on the right track and what can I add on to what I think thus far?

Thanks in advance for your help! It is totally appreciated!
 
Physics news on Phys.org
It'sa little confusing, can you post the complete question?
 
If it is desirable to produce the large image, then why does the camera get wider/longer?

I agree, I'm not sure what the question is exactly asking! Thanks for your help thus far!
 
Not sure what it's asking but:
To make a large image you want a large negative, the minimum detail siaze on a film (or a CCD) is a fixed sizeso to get more detail/pixels you need bigger film (or CCD).

In a perfect camera you are limited by diffraction, the larger the lens the less the effect of diffraction
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top