Orthopedic Drills Research - Need Help

  • Thread starter Thread starter mtadi
  • Start date Start date
AI Thread Summary
There is a request for assistance in finding research related to orthopedic drills. The original poster seeks guidance from those knowledgeable in this area. A response suggests using Google to search for relevant information, highlighting the abundance of resources available online. The provided link directs to a search result page for orthopedic drills. Engaging with these resources may yield valuable insights for the inquiry.
mtadi
Messages
1
Reaction score
0
Hello all:
I hope this message finds you well ,I am looking for the persons who have

researcheas about orthopedics drills.would you please help me .I appreciate that
 
Engineering news on Phys.org

Thread 'Bubble formation in 4 mm gap vessel'

How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Find 3D Printer & Software Resources for Prototype Creation'

I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
View full post »

Similar threads

Joining the Forum to Enhance My Children's Math and Science Education
Replies
3
Views
386
Seeking Guidance on Internal Floating Roof Tank Construction with Dome Roof
Replies
2
Views
1K
Leverage, MOI, mass, distance from fulcrum for piano key mechanism
Replies
8
Views
1K
MHB Practice test help - probability from data
Replies
2
Views
2K
Looking for a manufacturer to build a custom compound bow for me
Replies
10
Views
2K
Help! I need to find the speed of a conveyor to keep consistent gaps
Replies
6
Views
713
Evaluating Motor Specifications for a Conveyor
Replies
43
Views
4K
What is This Piece of Equipment?
Replies
2
Views
1K
B Recommendations for International Research Competitions
Replies
4
Views
2K
B Will there be water coming out of the last hole?
Replies
17
Views
1K

Hot Threads

Recent Insights

Back
Top