Persistence Glowness of Platinum metal after heating

AI Thread Summary
The discussion centers on the phenomenon of persistent glow in platinum metal after it is removed from a flame. When platinum wire is heated in a Bunsen burner, it emits light due to incandescence, a process where the metal's temperature increases, causing it to glow. The persistent glow occurs because platinum retains heat effectively, allowing it to continue emitting light for a short period even after the heat source is removed. This property is attributed to platinum's high melting point and thermal conductivity, which enable it to maintain elevated temperatures longer than many other metals. The discussion emphasizes the scientific principles behind this behavior, focusing on the thermal properties of platinum and the mechanics of incandescence.
partha1963
Messages
13
Reaction score
0
What is the reason of Persistent Glowness of Platinum metal after removing it from the flame ?
 
Chemistry news on Phys.org
partha1963 said:
What is the reason of Persistent Glowness of Platinum metal after removing it from the flame ?

Please elaborate - your question as posted doesn't make much sense.
 
I want to say " A platinum wire is heated in Bunsen burner and it is found to glow after removing the Platinum wire from the flame. Why?"
 
First of all - WHY does it glow?
 

Thread 'Humidity of a saturated NaCl solution with anticaking additive'

I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
View full post »

Similar threads

Mining waste for cheaper hydrogen fuel production
Replies
17
Views
3K
I What radioactive metal glows white hot all the time?
Replies
18
Views
1K
What Do Flame Tests Reveal About Sodium and Chloride?
Replies
6
Views
3K
I've seen many mentions of metal catalysts why metal? What do they do?
Replies
1
Views
2K
Proper material for electrolytic cell?
Replies
4
Views
2K
Electroplating of platinum/palladium etc on copper, brass question
Replies
9
Views
4K
Reactive metal wires in a fuel oxidizer mixture
Replies
0
Views
1K
Catalytic Converters - Three Questions
Replies
6
Views
4K
I Change in the size of a hole in a constrained metal when heated
Replies
9
Views
716
Change in Free Energy when Heating a Substance
Replies
9
Views
3K

Hot Threads

Recent Insights

Back
Top