Piezo-electricity, can it be applied to large structures

AI Thread Summary
Piezo-electricity can theoretically be applied to large structures like bridges to generate electricity from traffic, but it does not provide free energy. The energy harvested from piezoelectric materials comes from the additional fuel consumed by vehicles due to the deformation caused by their weight. Similar applications, such as piezo inserts in shoes, also rely on energy derived from the food consumed by individuals. While the technology could be used to capture energy from pedestrians on busy streets, the overall energy gain is limited by the energy input required for movement. Therefore, while feasible, piezo-electric applications in large structures may not be a practical energy solution.
pj83
Messages
5
Reaction score
0
I'm new to electrical engineering so this is probably a stupid question. But after reading about piezo-electricity, can it be applied to large structures, like a bridge, to generate electricity when traffic travels over it ?
 
Engineering news on Phys.org


pj83 said:
I'm new to electrical engineering so this is probably a stupid question. But after reading about piezo-electricity, can it be applied to large structures, like a bridge, to generate electricity when traffic travels over it ?

Welcome to the PF. Not a stupid question at all. We had a similar thread someplace here on the PF recently. Bottom line is that you don't get any free energy out of it. The energy that you could harvest from deforming (banging on) a piezo or other roadway would come from extra fuel burned in the cars.
 


Yeah I suppose that's true, I've read that piezo inserts in shoes could be used for powering mobiles and the like. Could'nt the same technology collect energy from people walking on pavements in busy streets ?
 


Same deal: the energy for that comes, ultimately, from the food the pedestrians eat. Though given the weight problem this country suffers, it might not be a bad idea.
 
Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
Thread 'Electromagnet magnetic field issue'
Hi Guys We are a bunch a mechanical engineers trying to build a simple electromagnet. Our design is based on a very similar magnet. However, our version is about 10 times less magnetic and we are wondering why. Our coil has exactly same length, same number of layers and turns. What is possibly wrong? PIN and bracket are made of iron and are in electrical contact, exactly like the reference design. Any help will be appreciated. Thanks. edit: even same wire diameter and coil was wounded by a...
Back
Top