Pressure/Volume question. A2 Physics

  • Thread starter Thread starter RSG_9
  • Start date Start date
  • Tags Tags
    Physics
AI Thread Summary
The discussion revolves around a physics homework problem involving pressure and volume changes in a flask with and without powder. The initial pressure and volume of the air in the hand pump were calculated, leading to a volume of 2.76 x 10^-5 m^3. The participant expressed uncertainty about the method used and the need for the ambient temperature to solve for the new amount of gas using the ideal gas law. They highlighted that without knowing the initial temperature, it is challenging to determine the volume occupied by the added gas. The conversation emphasizes the importance of temperature in calculations involving gas laws.
RSG_9
Messages
7
Reaction score
0

Homework Statement



A hand pump was used to raise the pressure of the air in a flask of volume 1.2 x 10^-4 m^3, without and then with powder in the flask.
- Without powder, pressure increased from 110kPa to 135kPa
- With 0.038kg of powder, pressure increased from 100kPa to 141kPa

1) Show that the volume of air in the hand pump initially was 2.7 x 10^-5 m^3.
2) Calculate the volume and the density of the powder.


Homework Equations


pV=nRT

P=pressure V=volume n=#of moles R=gas constant T=temp


The Attempt at a Solution


For the first part, I found the increase in pressure factor to be 1.23, multiplied this to the volume, then took away the original volume which got me an answer of 2.76x10^-5... I wasn't sure if that was the right method to take so I didn't want to start the second part without fully understanding the first.
 
Physics news on Phys.org
I have solved this now. If anybody would like to know the solution for future reference I will be happy to help.
 
For the first part, since the volume of the flask is constant, when you add gas using the pump, it seems to me that both the pressure and temperature will go up. Since you know the ratio of pressures, it seems to me that the best you can do using the ideal gas law is to say that

n2T2 = 1.23 n1T1

Without knowing the ambient temperature T1, I don't see how you would solve for the new amount of gas in the flask n2. I think you need to know this, because you need to then use Avogadro's law to compute how much volume the added amount of gas (n2-n1) would have occupied at ambient temperature. Was T1 given in the problem, or am I just missing something?
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top