Problems with First order RC circuit

3 replies · 3K views · last reply
thuc
Messages
12
Reaction score
0
Member warned to use the homework template for posts in the homework sections of PF.
I have problems with question b. I don't know where to start. If the switch is on steady state, the current through capacitor would be 0 and i can't have K. This makes me confused.
This is the Total response function of a): V0(t) = K^(-1/2t)
 
Attachments
  • Circuit schematic for Prob. 7.34: a 12 V source in series with a 2 ohm resistor feeds a parallel branch of a 4 ohm resistor with switch at t = 0 and a 3 F capacitor, with output voltage v0 across the capacitor.
    Untitled.png
    8.9 KB · Views: 511
The image shows a 12V power source with 2##\Omega## internal resistance connected, in parallel, with a parallel RC circuit (3F and 4##\Omega##) via a switch.
The voltage across the capacitor is labelled ##v_0##.
Part (a) says the switch, open for a long time, is closed at t=0, find ##v_0(t)##.
Part (b) says the switch has been closed for a long time, and is opened at t=0, find ##v_0(t)##.
These two parts normally have a similar method of solution, so please show your method for part (a) so we can see how you are thinking.

For part (b) ... what is physically happening? What is the initial voltage on the capactor, what happens to the charge on the capacitor for t>0?
 
Ok, this is part a)
 
Attachments
  • Handwritten nodal voltage equations on lined notebook paper, with a worked derivation and a section headed Homework 2 showing part a) of a circuit problem.
    14466202_885229441578871_571266274_o.jpg
    26.1 KB · Views: 491
  • Handwritten circuit analysis on lined notebook paper: a resistor and capacitor circuit with a 12 V source and switch, KVL equations, and a first-order differential equation for the capacitor voltage at t > 0.
    14466255_885229451578870_783701545_o.jpg
    27 KB · Views: 534
  • Handwritten notebook working for a first-order circuit: natural response Vn(t) = Ke^(-t/4), forced response Vf(t) = B, Vf(t) = 0 giving B = 0, total response Vo(t) = K e^(-t/2)-type form, V(0+) = K = 2.5 V gives K = 8, so Vo(t) = 8 e^(-t/2).
    14466252_885229468245535_437598915_o.jpg
    24.4 KB · Views: 487
thuc said:
Ok, this is part a)
Are you familiar with the response of a series RC circuit excited with a step input?
Are you familiar with the Thevenin's theorem?