Projectile Motion- Horizontal Range and Time of Flight

AI Thread Summary
The discussion revolves around calculating the horizontal range and time of flight for two bullets fired from a rifle at different angles. The first bullet is shot at 60° and achieves a horizontal range of 3531 meters with a time of flight of 35.3 seconds. The second bullet is shot at 45° and has a horizontal range of 4077 meters with a time of flight of 28.8 seconds. There is clarification on using the initial velocity of 200 m/s in the equations, confirming it is appropriate to use this value as 'v'. Understanding the equations and their derivation is suggested for better comprehension.
leah3000
Messages
41
Reaction score
0

Homework Statement



A rifle is used to fire two bullets. The first shot is at an angle of 60° above the horizontal and the second at an angle of 45° above the horizontal. The speed of EACH bullet as it leaves the rifle is 200ms^1. For EACH bullet calculate the horizontal range and the corresponding time of flight.

Homework Equations



Horizontal Range: v^2sin2ө/ g

Time of Flight= 2vsinө/g

The Attempt at a Solution



Horizontal Range for 1st shot= (200^2)sin2(60)/9.81

=3531m

Time of Flight= 2(200)sin(60)/9.81

=35.3 secs

Horizontal Range for 2nd shot= (200^2)sin2(45)/9.81

=4077m

Time of Flight= 2(200)sin(45)/9.81

= 28.8 secs

I'm not sure if I'm supposed to use the 200 as v or if I'm to calculate v somehow from the given information.:confused:
 
Last edited:
Physics news on Phys.org
You have used the equations correctly. I guess you are just not sure how the equations work? Maybe reading the proofs of these equations would help.
 
ok...i just keep thinking that since it left the rifle at 200ms^1that that would be the initial velocity, u. I wasn't too sure if I could use it in the equation as v. I thought that i some how had to calculate it but then there would be more than one unknowns when using the equatios of motion:redface:
 
ok...i just keep thinking that since it left the rifle at 200ms^1that that would be the initial velocity, u. I wasn't too sure if I could use it in the equation as v. I thought that i some how had to calculate it but then there would be more than one unknowns when using the equations of motion:redface:
 
v represents initial velocity, so it should be 200 m/s.
 
ok thank you
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top