Projectile motion of a fired cannon ball

AI Thread Summary
A cannonball fired at a 36.9° angle towards a building 400 m away will hit in 5.0 seconds, confirmed by calculations using the horizontal component of velocity. When fired horizontally from a 150 m high cliff, the time to hit the building needs to be calculated differently. The horizontal velocity component is crucial for determining the impact time in this scenario. The initial velocity (V0) is stated as 100 m/s, which applies to the first question. The discussion emphasizes the importance of understanding projectile motion principles for accurate timing predictions.
KEVIN Phlem
Messages
4
Reaction score
0
1. A cannonball is fired toward a vertical building 400 m away
with an initial velocity of at 36.9° above the horizontal.
The ball will hit the building in
A. 4.0 s. B. 5.0 s.
C. less than 4.0 s. D. more than 5.0 s.

2. If the cannonball in the previous question is fired horizontally
from a 150-m-high cliff, but still 400 m from the building, then
the ball will hit the building in
A. 4.0 s. B. 5.0 s.
C. less than 4.0 s. D. more than 5.0 sI used x =(Vo * Cos 36.9)t and got 5.0 s, which is correct, but i don't know how to solve for #2
 
Physics news on Phys.org
KEVIN Phlem said:
1. A cannonball is fired toward a vertical building 400 m away
with an initial velocity of at 36.9° above the horizontal.
The ball will hit the building in
A. 4.0 s. B. 5.0 s.
C. less than 4.0 s. D. more than 5.0 s.

2. If the cannonball in the previous question is fired horizontally
from a 150-m-high cliff, but still 400 m from the building, then
the ball will hit the building in
A. 4.0 s. B. 5.0 s.
C. less than 4.0 s. D. more than 5.0 sI used x =(Vo * Cos 36.9)t and got 5.0 s, which is correct, but i don't know how to solve for #2
What is the horizontal component of velocity in this case?

By the way: What is the value of V0 ?
 
100 m/s, sorry
 
KEVIN Phlem said:
100 m/s, sorry
That answers which question?
 
SammyS said:
That answers which question?
The first one.
 
KEVIN Phlem said:
The first one.
KEVIN Phlem said:
The first one.
In that case it must have answered both.

V0 is the horizontal component if it fired horizontally.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top