Proton & Alpha Particle Transmission through Potential Barriers

  • Thread starter Thread starter da_warped_1
  • Start date Start date
  • Tags Tags
    Potential
AI Thread Summary
The probability of transmission through potential barriers is greater for an alpha particle than for a proton when both have identical energy. This is attributed to the alpha particle's larger mass, which results in a smaller de Broglie wavelength, leading to reduced wave-like behavior. Consequently, the alpha particle is less influenced by the potential barriers. Its larger charge also contributes to a decreased likelihood of scattering or reflection by the electric field of the barrier. Thus, the alpha particle has a higher probability of tunneling through the barrier compared to the proton.
da_warped_1
Messages
7
Reaction score
0
hi I'm having some trouble with this question:

A proton and an alpha particle of identical energy encounter potential barriers of identical height and width. For which is the probability of transmission greatest and why?

thanks
 
Physics news on Phys.org


The probability of transmission is greatest for the alpha particle. This is because the alpha particle has a larger mass and therefore a smaller de Broglie wavelength compared to the proton. As a result, the alpha particle experiences less wave-like behavior and is less affected by the potential barriers. Additionally, the alpha particle has a larger charge, making it less likely to be scattered or reflected by the electric field of the potential barrier. Therefore, the alpha particle has a higher probability of tunneling through the barrier compared to the proton.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top