Purpose of a voltage follower (buffer)?

  • Thread starter Thread starter lamba89
  • Start date Start date
  • Tags Tags
    Buffer Voltage
AI Thread Summary
A voltage follower, or buffer, is characterized by its nearly infinite input impedance, allowing it to connect to a signal source without loading it down, thus preserving the original signal. This makes it ideal for applications where signal integrity is crucial, such as in sensor interfacing and audio processing. The discussion also touches on the concept of a current follower, which is confirmed to exist and is typically designed with low input impedance. Participants emphasize the importance of prior research on the topic to foster more informed discussions. Understanding these concepts is essential for effective circuit design and signal management.
lamba89
Messages
6
Reaction score
0
What are the applications of a voltage follower?
 
Engineering news on Phys.org
lamba89 said:
What are the applications of a voltage follower?

Probably the most important characteristic of a voltage follower is that it has almost infinite input impedance. This means that when you connect a signal to its input, the source of the signal is not loaded down and the source won't even notice it has something connected to it, almost like an open circuit. So the voltage follower is able to reproduce the signal from the source to its output without the problem of changing the original signal by drawing current from it.
 
Last edited:
is there a current follower? and if so, should it have a low input impedance? Thanks.
 
lamba89 said:
What are the applications of a voltage follower?

Hopefully you did at least the minimum reading at wikipedia and other basic websites before posting this open-ended question here. What did you learn from that research, and what are your specific questions that you still have after that reading? Please provide links to what you don't understand yet.
 
delta14 said:
is there a current follower? and if so, should it have a low input impedance? Thanks.

Yes, and yes.
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »
Thread 'Beauty of old electrical and measuring things, etc.'

Thread 'Beauty of old electrical and measuring things, etc.'

Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
View full post »

Similar threads

Distributing a clock signal using a clock fanout buffer
Replies
21
Views
5K
How a current buffer transistor cancels the early effect (Cascode)
Replies
3
Views
2K
Virtual Ground Voltage Reference
Replies
6
Views
2K
How to Safely Generate High Voltage for Capacitor Testing?
Replies
49
Views
4K
High voltage surface conduction prevention
Replies
3
Views
1K
Why isn't there a buffer on an oscilloscope?
Replies
2
Views
2K
What's the advantage of using a voltage buffer amplifier?
Replies
7
Views
7K
Overvoltage Protection
Replies
5
Views
1K
The battery voltage drops when fed to the DC booster circuit
Replies
3
Views
1K
Basic question about RLC circuits
Replies
32
Views
2K

Hot Threads

Recent Insights

Back
Top