Q: Solve Poiseuille's Law for Volume Flow Rate

  • Thread starter Thread starter Nathan phisi
  • Start date Start date
AI Thread Summary
The discussion revolves around solving a problem using Poiseuille's Law to determine the volume flow rate of oil leaking from a tank. Key parameters include the oil's viscosity of 7.5 Pa s, a fluid pressure of 126 kPa, and a hole radius of 1.5 mm. The length of the hole is clarified to be 0.02 m, which is essential for applying the equation. Participants express confusion over the unknown variables but ultimately confirm the necessary values to proceed with the calculation. The conversation emphasizes the importance of correctly identifying all parameters in fluid dynamics problems.
Nathan phisi
Messages
5
Reaction score
0

Homework Statement



A large tank contains oil with a viscosity of η = 7.5 Pa s. The tank has walls and floor which are 2 cm thick, but there is a small circular hole at the base of the tank through which oil is leaking. The fluid pressure at the base of the tank is 126 kPa (atmospheric pressure is 101 kPa) and the radius of the hole is 1.5 mm. What is the volume flow rate at which the oil is leaking out of the tank (in m3 s −1 )?

(A) 1.2 × 10−3 (B) 7.1 × 10−4 (C) 2.7 × 10−5 (D) 4.1 × 10−6 (E) 3.3 × 10−7

Homework Equations


Poiseulle law equation (maybe)

The Attempt at a Solution


I'm pretty sure this has to do with Poiseulle's law, because of the variables. I have all variables for the P law equation (given in the equation) except length (and the needed flowrate). I do have trouble with 2 variables being unknown, so a little help with that would be greatly appreciated :)
 
Physics news on Phys.org
You do know the length.
 
  • Like
Likes Nathan phisi
Oh dang, you're right, the length was 0.02m. Don't ask me how long I was on this question and didn't click. Thanks!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top