Question about effects of quick pipeline shut-down…

  • Thread starter Thread starter SysEng
  • Start date Start date
  • Tags Tags
    Effects
AI Thread Summary
The discussion focuses on predicting the mechanical effects of emergency shut-down scenarios on pipeline networks, particularly concerning crude oil. Participants are sharing insights on the tools and methods used to assess impacts like hammering, emphasizing the importance of liquid density in these predictions. A webinar addressing these topics has been identified as a valuable resource for further information. The conversation highlights the need for effective modeling and analysis in pipeline management during critical situations. Understanding these effects is crucial for maintaining pipeline integrity and safety.
SysEng
Messages
8
Reaction score
0
How are you predicting the effects of emergency shut-down scenarios on your pipeline networks?

I'm seeking some input on the tools you use to predict mechanical effects (hammering, etc.) from critical scenarios such as emergency shut-down.
 
Engineering news on Phys.org
What kind of liquid? Density (gas or liquid) makes a huge difference.
 
Astronuc said:
What kind of liquid? Density (gas or liquid) makes a huge difference.

Thanks for your response!
The liquid would be crude oil...
 
SysEng said:
How are you predicting the effects of emergency shut-down scenarios on your pipeline networks? I'm seeking some input on the tools you use to predict mechanical effects (hammering, etc.) from critical scenarios such as emergency shut-down.

After doing a little research, I actually came across a webinar that will apparently cover these topics - looks like it's part 3 of a larger series. Here's the address, as it looks like it's open to the public:

http://www.flowmaster.com/webinars/...il&utm_campaign=FMUSA_P&P _Part3_Webinar_Q310
 

Thread 'Questions about the Tesla turbine'

Hi all, i have some questions about the tesla turbine: is a tesla turbine more efficient than a steam engine or a stirling engine ? about the discs of the tesla turbine warping because of the high speed rotations; does running the engine on a lower speed solve that or will the discs warp anyway after time ? what is the difference in efficiency between the tesla turbine running at high speed and running it at a lower speed ( as fast as possible but low enough to not warp de discs) and: i...
View full post »
Thread 'Where is my curb stop?'

Thread 'Where is my curb stop?'

My water meter is submerged under water for about 95% of the year. Today I took a photograph of the inside of my water meter box because today is one of the rare days that my water meter is not submerged in water. Here is the photograph that I took of my water meter with the cover on: Here is a photograph I took of my water meter with the cover off: I edited the photograph to draw a red circle around a knob on my water meter. Is that knob that I drew a red circle around my meter...
View full post »

Similar threads

Quantitative Risk Assessment Of buried crude Oil Pipelines
Replies
7
Views
3K
Question about differential pressure on subsea pipelines.
Replies
2
Views
3K
Flow rate of fluid at a burst leakage in a pipeline due to over pressurization
Replies
5
Views
4K
Fukushima Fukushima -- possible alternate scenario?
Replies
2
Views
1K
I Is Maxwell's electromagnetism an effective (field) theory?
Replies
3
Views
109
I have a few questions about refrigeration and AC units
Replies
1
Views
3K
The age-old shut down vs hibernate debate
Replies
39
Views
5K
B Relative Dead Stop in Deep Space
Replies
8
Views
2K
Passive offshore desalination plant
Replies
4
Views
3K
Jackhammer on Vehicle Suspension, Unsprung Mass, Tire patch load
Replies
13
Views
3K

Hot Threads

Recent Insights

Back
Top