Question about electrostatic forces

AI Thread Summary
Two identical conducting spheres initially attract each other with an electrostatic force of 0.0864 N at a separation of 70.6 cm. When connected by a wire, they share their charges and subsequently repel each other with a force of 0.0422 N after the wire is removed. The discussion revolves around determining the initial negative and positive charges on the spheres before they were connected. There is confusion regarding the charge distribution after connecting the spheres, as it is expected that they would have equal charges post-connection. The thread highlights the principles of electrostatics and charge conservation in conducting materials.
breedb
Messages
9
Reaction score
0
Two identical conducting spheres, fixed in place, attract each other with an electrostatic force of 0.0864 N when their center-to-center separation is 70.6 cm. The spheres are then connected by a thin conducting wire. When the wire is removed, the spheres repel each other with an electrostatic force of 0.0422 N.



Of the initial charges on the spheres, with a positive net charge, what was (a) the negative charge in coulombs on one of them and (b) the positive charge in coulombs on the other?



Attempt at solution

All I could figure out so far has been:

kq1(before)q2(before)/r^2=-0.0864
kq1(after)q2(after)/r^2=0.0422
q1(before)+q2(before)=q1(after)+q2(after)

What doesn't make sense to me is I thought after a wire is but between two objects, the charges become the same.
 
Physics news on Phys.org
Nevermind. I was getting confused. I don't no how to delete a post, but don't respond to this.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top