Questions on Geometrical Optics Answered

AI Thread Summary
The hands of a clock appear to move counterclockwise in a mirror because the front and back are reversed, making it seem as if you are viewing the clock from behind. Moving farther away from a plane mirror does not change the amount of yourself you can see; the reflection remains consistent regardless of distance. To determine if an image in a mirror is real or virtual, a real image can be projected onto a screen, while a virtual image cannot. If an image can be seen on a piece of paper, it is classified as real. Understanding these principles clarifies common questions about geometrical optics.
tennistud
Messages
1
Reaction score
0
I just have a few questions on geometrical optics.

1. Why do the hands of a clock move counterclockwise in a mirror?

2. If you move farther away from a plane mirror, will you be able to see more of yourself or less?

3. How do you decide if the image in a mirror is real or virtual?

Thanks in advance for your help.
 
Science news on Phys.org
1. Front and back are reversed in a plane mirror. The hands move te same way as they would when viewing the clock from the back

2. Neither

3. A real image can be viewed on a screen. If you can see an image on a piece of paper, it's real.
 
Thread 'A quartet of epi-illumination methods'
Well, it took almost 20 years (!!!), but I finally obtained a set of epi-phase microscope objectives (Zeiss). The principles of epi-phase contrast is nearly identical to transillumination phase contrast, but the phase ring is a 1/8 wave retarder rather than a 1/4 wave retarder (because with epi-illumination, the light passes through the ring twice). This method was popular only for a very short period of time before epi-DIC (differential interference contrast) became widely available. So...
I am currently undertaking a research internship where I am modelling the heating of silicon wafers with a 515 nm femtosecond laser. In order to increase the absorption of the laser into the oxide layer on top of the wafer it was suggested we use gold nanoparticles. I was tasked with modelling the optical properties of a 5nm gold nanoparticle, in particular the absorption cross section, using COMSOL Multiphysics. My model seems to be getting correct values for the absorption coefficient and...
Back
Top