Finding the Angle in Radial-Transverse Motion: A Scientific Approach

  • Thread starter Thread starter Jason03
  • Start date Start date
  • Tags Tags
    Motion
AI Thread Summary
The discussion focuses on solving a physics problem related to radial-transverse motion, specifically finding the angle at which an object is about to slip. Participants emphasize the importance of analyzing forces acting on the object and using free body diagrams to derive equations. They suggest breaking down equilibrium equations into radial and transverse components to find the angle. The condition of impending slip indicates that static friction is about to be overcome by gravitational forces. Overall, the conversation provides guidance on applying these principles to determine the required angle.
Physics news on Phys.org
Hi Jason03,

You follow the same procedure as you did part a. At point B (right before it slips) you know the total acceleration (magnitude and direction.) What forces are acting on the object? What information does being on the verge of slipping tell you? From your free body diagram you can write the components of the forces; some of these will contain theta and you can then solve for theta. What do you get?
 
You say that I know the acceleration, so does that mean its the same as in part A?...and the condition right before it slips is when static friction is about to be overcome by the force of gravity.
 
Hi, Jason. It's been a while but I will try to get you started. I will assume that you have already drawn your FBD and KD for when the block is just about to slip. Breaking Equilibrium equations into radial and transverse components should be your next move. What do have so far?
 
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Thread 'Egg Drop Challenge! Need ideas for winning designs'

I was thinking using 2 purple mattress samples, and taping them together, I do want other ideas though, the main guidelines are; Must have a volume LESS than 1600 cubic centimeters, and CAN'T exceed 25 cm in ANY direction. Must be LESS than 1 kg. NO parachutes. NO glue or Tape can touch the egg. MUST be able to take egg out in less than 1 minute. Grade A large eggs will be used.
View full post »

Similar threads

Work energy incline with spring
Replies
15
Views
4K
Solving a Work/Energy Physics Problem: Troubleshooting and Solution
Replies
5
Views
2K
Calculating Velocity of a Collar Released from a Depressed Spring
Replies
10
Views
2K
Solving a Rollercoaster Problem: Confirmation Needed
Replies
1
Views
3K
Is Radial Acceleration Always Downward in Circular Motion?
Replies
8
Views
6K
How to Calculate the Horizontal Distance in This Curvilinear Motion Problem?
Replies
1
Views
6K
Solving Aircraft Velocity Problem: FBDs, a-sub-n & Force in x Direction
Replies
2
Views
3K
How do I solve this dynamics problem involving a pulley?
Replies
17
Views
5K
Troubleshooting Vector Angles in Three Dimensions
Replies
1
Views
1K
Setting up Forces: Finding Theta of F2
Replies
3
Views
2K

Hot Threads

Recent Insights

Back
Top