Radiation Pressure causing acceleration

AI Thread Summary
A vertically pulsed laser emits an 800 MW pulse lasting 220 ns at an 8 mg pellet, which is initially at rest. To determine the maximum height the pellet reaches, one must relate power to energy and then to momentum, applying the formula for pressure, force, and acceleration. The discussion emphasizes using the relationship between energy and momentum for light without delving into forces. Participants seek confirmation on their calculations, indicating that the resulting height is expected to be quite small due to the pellet's mass and the brief pulse duration. Understanding these principles is crucial for accurately predicting the pellet's behavior under radiation pressure.
jmm5872
Messages
38
Reaction score
0
A vertically pulsed laser fires a 800 MW pulse
of 220 ns duration at a small 8 mg pellet at
rest. The pulse hits the mass squarely in the
center of its bottom side.
The speed of light is 3 × 108 m/s and the
acceleration of gravity is 9.8 m/s2.

If the radiation is completely absorbed
without other effects, what is the maximum
height the mass reaches?
Answer in units of μm.

Pressure*Area = Force = ma
F = dp/dt
p = E/c


I'm not even sure where to start. I guess I need to figure out the relation between Power and energy to get the momentum. From that I can get the force and then acceleration, etc...

Any hints would be appreciated
 
Physics news on Phys.org
Do you have any idea what the number should be? I gave it a try and my best attempt, from working out the net force on the pellet and the resulting acceleration then working out the distance kinematically. However, the h I get is very small due to the (comparatively) large mass and very short pulse time.

I'd like to know my answer was in the ballpark before I describe it so that I can help with confidence.

Cheers
 
jmm5872 said:
A vertically pulsed laser fires a 800 MW pulse
of 220 ns duration at a small 8 mg pellet at
rest. The pulse hits the mass squarely in the
center of its bottom side.
The speed of light is 3 × 108 m/s and the
acceleration of gravity is 9.8 m/s2.

If the radiation is completely absorbed
without other effects, what is the maximum
height the mass reaches?
Answer in units of μm.

Pressure*Area = Force = ma
F = dp/dt
p = E/c


I'm not even sure where to start. I guess I need to figure out the relation between Power and energy to get the momentum. From that I can get the force and then acceleration, etc...

Any hints would be appreciated

There's a very simple relation between energy and momentum for light -- which you have given above anyway. You can use that without worrying about forces.

Power is just energy per unit time. If you really want forces, then note that force is momentum per unit time... so for light, the relation between power and force of a light beam is the same as the relation between energy and momentum of a light pulse.

Cheers -- sylas
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top