What is the current in each resistor in a complex RC circuit?

kevbot010
Messages
2
Reaction score
0

Homework Statement



Find the current I1 in the 1.2
resistor
at the bottom of the circuit between the two
power supplies.
Answer in units of A.
015 (part 2 of 3) 10.0 points
Determine I2.
Answer in units of A.
016 (part 3 of 3) 10.0 points
Determine I3.
Answer in units of A.

Homework Equations


I=Ifinal(e^-t/RC)
V=IR



The Attempt at a Solution



V=IR
I=V/R
I=9.5/1.2
I=7.91667A

The attachment is a picture of the circuit. I really have no idea how to solve this and could use some helpful explanation. Thanks!

Kevin
 

Attachments

  • RC Circuit.png
    RC Circuit.png
    6.7 KB · Views: 443
Last edited:
Physics news on Phys.org
ok i understand i must use the loop rule and the junction rule.

I made it where there are two loops
Loop1:
9.5-1.2I1+2-3-5.4I2-3.1=0

Loop2:
3.1-5.4I2-8.4I3=0

I think this may be right, if it is i am still unsure of how to continue with the problem
 

Thread 'Direction of the magnetic field of an oscillating charge'

Hello everyone, I’m considering a point charge q that oscillates harmonically about the origin along the z-axis, e.g. $$z_{q}(t)= A\sin(wt)$$ In a strongly simplified / quasi-instantaneous approximation I ignore retardation and take the electric field at the position ##r=(x,y,z)## simply to be the “Coulomb field at the charge’s instantaneous position”: $$E(r,t)=\frac{q}{4\pi\varepsilon_{0}}\frac{r-r_{q}(t)}{||r-r_{q}(t)||^{3}}$$ with $$r_{q}(t)=(0,0,z_{q}(t))$$ (I’m aware this isn’t...
View full post »

Thread 'Initial conditions for orbits around a wormhole'

Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
View full post »

Similar threads

When Is the Potential Across a Capacitor Equal to That Across a Resistor?
Replies
2
Views
2K
Calculating Current in a Series RC Circuit
Replies
4
Views
2K
Constant Current Source in Driving an RC Circuit
Replies
6
Views
8K
Why can we add impedances in series?
Replies
4
Views
1K
Series-Parallel RC Circuit Analysis
Replies
1
Views
3K
Series-Parallel RC Circuit Analysis
Replies
2
Views
2K
Calculating Charge and Time in a Discharging RC Circuit
Replies
3
Views
2K
Need help finding current on RC circuit
Replies
5
Views
7K
RC Phase Shift Oscillator not Oscillating
Replies
41
Views
7K
Finding Voltage Across A Resistor in a 1st Order RC Circuit
Replies
1
Views
3K

Hot Threads

Recent Insights

Back
Top