Exploring Different Methods for Measuring Refractive Index

sean_cameron
Messages
2
Reaction score
0
I am currently undergoing advanced higher physics and my investigation is on measuring refractive index.
I have conducted 3 experiments so far: the standard ray lamp experiment from higher and two different versions of the apparent depth method.
However, these experiments have been simple and I was looking for any advice for another experiment.
Thank you
 
Physics news on Phys.org
sean_cameron said:
the standard ray lamp experiment

Which is the standard one? Is that where you measure the angle of incidence and the angle of refraction?

Here's another one from HyperPhysics (great site!).

http://hyperphysics.phy-astr.gsu.edu/hbase/geoopt/prism.html#c1

From that page, "A refracting prism is a convenient geometry to illustrate dispersion and the use of the angle of minimum deviation provides a good way to measure the index of refraction of a material." So if you can get your hands on a prism then you might be in business.
 
You may also wish to try lenses.There are several ways to measure the focal length of a lens and by measuring the radius of curvature of the lens faces and then using the lens formula...1/f=(n-1)(1/r1+1/r2) you can calculate n.
 
Tom Mattson said:
Which is the standard one? Is that where you measure the angle of incidence and the angle of refraction?

Yes this is the one i was referring to.
Thanks for the help but i was hoping to stick to the same rectangular prism i have already been using, any other ideas?
 
Hello everyone, I’m considering a point charge q that oscillates harmonically about the origin along the z-axis, e.g. $$z_{q}(t)= A\sin(wt)$$ In a strongly simplified / quasi-instantaneous approximation I ignore retardation and take the electric field at the position ##r=(x,y,z)## simply to be the “Coulomb field at the charge’s instantaneous position”: $$E(r,t)=\frac{q}{4\pi\varepsilon_{0}}\frac{r-r_{q}(t)}{||r-r_{q}(t)||^{3}}$$ with $$r_{q}(t)=(0,0,z_{q}(t))$$ (I’m aware this isn’t...
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
Back
Top