Become a Robotic Engineer: What it Takes

Thread starter Hyperreality
Start date Nov 27, 2003
Tags

Engineer

AI Thread Summary

Becoming a robotic engineer typically requires a strong educational background in engineering, particularly in fields like mechanical, electrical, or computer engineering. Many colleges offer specialized programs or concentrations in robotics within their engineering degrees. Practical experience through internships or projects is also crucial for developing relevant skills. A passion for technology and problem-solving is essential, as is the drive to succeed in a competitive field. Pursuing a degree with a robotics focus can provide the necessary foundation for a career in this area.

Nov 27, 2003

Hyperreality

Can anyone please tell me what it takes to become a robotic engineer. Any suggestion is appreciated.

Engineering news on Phys.org

Nov 28, 2003

sheldon

This question is somewhat vague, I would have to answer it accordingly, You can do anything you put your mind to all it takes is drive.

Dec 1, 2003

MaxMoon

College

I know where I go to college, there is an option in all engineering programs to specialize in robotics.

Thread 'Bubble formation in 4 mm gap vessel'

How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...

View full post »

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...

View full post »

Thread 'Find 3D Printer & Software Resources for Prototype Creation'

I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...

View full post »