Room temperature unstable macromolecule

  • Thread starter Thread starter Edi
  • Start date Start date
  • Tags Tags
    Temperature
AI Thread Summary
The discussion centers on the feasibility of creating a macromolecule capable of ionization or conduction at room temperature through the use of a shared high-energy electron. It suggests that an organic polymer with alternating double bonds and multiple electron-donating groups could achieve this. The ideal macromolecule would need to be rigid enough to maintain electron overlap at room temperature and approximately the same length as the wavelength of long infrared radiation. The conversation touches on the potential applications of such a molecule, including photovoltaics based on conducting organic materials and organic thin film phototransistors. While there is acknowledgment of ongoing research in this area, participants express frustration with the slow pace of development toward creating an ambient heat converter that could harness energy from everyday sources like body heat and environmental radiation.
Edi
Messages
176
Reaction score
1
What would it take to make a ... macromolecule, a group of atoms, molecules that has one "shared" electron, witch is at a very high energy level, so that room temperatures internal kinetic energy aka heat/ temperature and room temperature long IR waves would be enough to ionize it or, at least, take it to the conduction band?
 
Chemistry news on Phys.org
You would need an organic polymer with alternating double bonds that is multiply substituted with electron donating groups. The electron donating ability of said groups to be determined. Length of the macromolecule should be approximately as long as the wavelength of the long IR electromagnetic radiation. The molecule should be fairly rigid to ensure that the overlap is maintained for the temperature of operation. (molecule should not flop around at room temperature, Tg >> RT)
 
So, it is possible. (?) Why don't we (can't we? ) develop this and use it to convert ambient heat and radiation into electrical current?
 
Hmm, so somethings actually being done at least along the lines of this.. Kinda.
Maybe someday we will actually have an ambient heat converter.. ( I really mean basically human body temperature, room temperature.. radiation coming of the walls and ground and what not. )
Its just that work is not done as fast as one would like.
Good. Kinda.
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top