Simple Question: Measurements of length & mass ZZZ

AI Thread Summary
Dust on samples and measuring devices can lead to inaccurate measurements, necessitating regular cleaning to ensure precision. Irregular samples can cause variations in mass and length readings, suggesting the need for standardized sample shapes or averaging multiple measurements. A slope in the balance affects weight readings, which can be corrected by using a spirit level to ensure the balance is horizontal. Other potential sources of error include temperature fluctuations and improper calibration of measuring instruments, which can be mitigated through routine checks and calibrations. Addressing these errors is crucial for obtaining reliable measurements in length and mass.
Norah
Messages
4
Reaction score
0
Discuss the effects of the following sources of errors on Measurements of length & mass. and suggest metods to overcome them:

1- Existing of a dust on both the sample and the measuring devices.
2- Irregularity of the samples.
3- Slope of the balance from the horizontal line.
4- Other sources.
 
Physics news on Phys.org
PlZZZZZZZZZZZ HELP TODAY
 
Do you want to suggest something first? For me, 3 would be as simple as using a 'spirit-level' or horizontal surface to sort out.

The Bob
 
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

To find the equilibrium position of a mass attached to an elastic string
Replies
17
Views
2K
Pendulum experiment systematic errors
Replies
41
Views
20K
Measuring the period of SHM using sound
Replies
1
Views
1K
Make 2 launchers that shoot a straw with clay at the end
Replies
3
Views
1K
Measuring mass without a balance
Replies
5
Views
8K
I How do the collider experiments measure the mass of the W boson?
Replies
4
Views
4K
I Discussing Interior Schwarzschild Proper Lengths & Gaussian Curvature
Replies
2
Views
2K
The mass of the pendulum bob was determined on an electronic scale and
Replies
34
Views
4K
I How to Measure Speed of Light & Is It Constant?
Replies
13
Views
3K
Lenz' Law - request for formula (for 2 given cases)
Replies
3
Views
2K

Hot Threads

Recent Insights

Back
Top