Solve Spring Gun Question Homework

  • Thread starter Thread starter Oliviam12
  • Start date Start date
  • Tags Tags
    Gun Spring
AI Thread Summary
The discussion revolves around calculating the spring constant of a spring-loaded toy dart gun, given the mass of the dart, the compression distance, and the dart's speed upon release. The key equations used include the work-energy principle, where the work done on the spring is equal to the kinetic energy of the dart. The user initially struggled with the problem but eventually realized that equating the stored energy in the spring to the dart's kinetic energy would lead to the solution. The final insight helped clarify the approach needed to find the spring constant. This method emphasizes the conservation of energy in the system.
Oliviam12
Messages
27
Reaction score
0

Homework Statement



A spring-loaded toy dart gun fires darts with a mass of 104 g. When the spring in the dart gun is compressed 8 cm, the dart flies off with a speed of 11.4 m/s. What is the spring constant of the spring in the dart gun?

Homework Equations


W=1/2*k*x^2
V=sqrt(2W/m)

The Attempt at a Solution


Not really much of a clue on how to do this problem, I tried to use this example;

A spring with spring constant 218.5 N/m is compressed by 0.291 m. Then a steel ball bearing of mass 0.0733 kg is put on the spring, and the spring is released. What is the speed of the ball bearing right after release? (The ball bearing will come off the spring exactly as the spring returns to its equilibrium position. We will assume that we can neglect the mass of the spring in this calculation.) W = 1/2*k*x^2 then us this equation: v = sqrt(2W/m)

I found on Google and work backwards but, it got confusing and messy. I did find the
kinetic energy to equal 6.7 J, but I don't think I need it?
 
Physics news on Phys.org
If one assumes conservation of energy and no losses due to friction (i.e. dissipative forces), then the energy stored in the spring become kinetic energy of the dart.

Equate the stored energy of the spring and the kinetic energy of the dart.
 
Thanks! That tip kind of caused an epiphany and I got it now.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top