Solving a Hot Air Balloon & Champagne Cork Problem

  • Thread starter Thread starter baseketballr09
  • Start date Start date
  • Tags Tags
    Air Balloon Hot
AI Thread Summary
The discussion revolves around a physics problem involving a hot air balloon and a champagne cork. The initial velocity of the cork, as observed from the ground, is calculated to be approximately 5.38 m/s, with components of 5 m/s horizontally and 2 m/s vertically. The cork reaches a maximum height of 6.2 m above the ground after being expelled. The time the cork remains in the air is determined using a quadratic equation derived from its motion equations. The urgency of the request for help highlights the importance of this problem for the individual's academic performance.
baseketballr09
Messages
4
Reaction score
0

Homework Statement


A hot air balloon rises from the ground with a velocity of (2.0m/s)y. A champagne bottle is opened to celebrate takeoff, expelling the cork horizontally with a velocity of (5.0m/s)x. When opened, the bottle is 6 m above the ground. a) What is the initial velocity of the cork, as seen by an observer on the ground? What is the speed of the cork, and its initial direction of motion, as seen by the same observer? b) Determine the maximum height above the ground attained by the cork. c) how long does the cork remain in the air?


Homework Equations





The Attempt at a Solution



you guys I'm so totally lost, please please please help me out. ILL PAY YOU. Add my aim sn: baseketballr09 or my msn: bballrkhan@hotmail.com and i'll get you $5-10 via paypal, honestly. This is so important, it determines the difference between a 3.7 gpa and a 2.9 gpa, because i have a huge quiz tomorrow and this is one of the problems that will be on it. THIS IS REALLY URGENT, IF YOU EVER GAVE A HOOT ABOUT YOUR GRADE THEN I HOPE YOU FEEL FOR ME, I'M REALLY STRESSED OUT AND I WOULD MUCH APPRECIATE HELP...I'M BEGGING YOU GUYS. JUST HELP ME OUT THIS ONCE :(
 
Physics news on Phys.org
Relax. You have to answer at least one question before I solve it for you.

What was the initial speed of the cork when it was expelled from the bottle, as seen by the ground observer?
 
if initial velocity and speed are the same thing...then i got 5.4 m/s
 
That’s right. Of course, I don’t know how you got it. Speed is the magnitude of velo.

a) The initial velo of the cork as seen from the ground has two components, vx and vy.
vx = 5 m/s and vy = 2 m/s. So, initial speed = sqrt(vx^2+vy^2)= 5.38 m/s. The velocity is given by the 2 components, and if you take x–axis in the horizontal dirn in which the cork is travelling, and y-axis in the upward dirn, then you can write initial vi = 2 i + 5 j.
If theta is the angle vi makes with the horizontal, then tan(theta)= vy/vx = 2/5. That gives you the dirn of motion as seen from the ground.

b) If it rises h m above its starting position, then vy^2=2gh => h= 0.2 m. So, it’ll rise 6.2 m above the ground.

c) If t secs is the time it stays in the air, then taking the origin at its starting point we have,
-6 = vy*t – gt^2/2 => -6 = 2t – 9.8*t^2/2. This is a quad eqn in t. You can solve it and take the +ve root.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Replies
10
Views
5K
Replies
4
Views
3K
Replies
4
Views
5K
Replies
5
Views
11K
Replies
1
Views
9K
Back
Top