Solving Kinematics Problems: Distance Traveled Before Applying Brakes

AI Thread Summary
To calculate the distance traveled before applying brakes, the average alcohol-free driver takes about 0.8 seconds at a speed of 17 m/s. The initial approach using the formula d = vt yields a distance of 14 meters, which the user doubts. However, the consensus is that this calculation is correct since it doesn't require acceleration, as the question pertains to the time before braking. The discussion emphasizes keeping the solution simple and not overcomplicating the problem. Overall, the method used to find the distance is validated by other participants in the thread.
nblu
Messages
56
Reaction score
0
Q: The average alcohol-free driver requires about 0.8 s to apply the brakes
after seeing an emergency. Calculate the distance traveled after seeing the emergency
before applying the brakes.

with the question, the given speed is 17 m/s and t = 0.8.
at first, i used d =vt equation to find the distance, however,
when i read through the question again, i had a feeling that it's not right.
my first answer was d=14m, but it just doesn't look correct.

i was thinking of finding the acceleration then use v^{2}_{f}=v^{2}_{i} +2a\Deltad
to solve for d, OR, use this equation, \Deltad=1/2(v_{1}+v_{2})\Deltat, without
even having to find the acceleration.

one part of my knowledge tells me that i don't need acceleration to do this question
because this is about "before" applying the break.

its confusing me..

any help would be greatly appreciated.

thank you
 
Last edited:
Physics news on Phys.org
You "know" what you did is right. Resist the temptation to complicate it. I'm sure you'll get a chance to use that other stuff later.
 
nblu said:
with the question, the given speed is 17 m/s and t = 0.8.
at first, i used d =vt equation to find the distance, however,
when i read through the question again, i had a feeling that it's not right.
my first answer was d=14m, but it just doesn't look correct.


one part of my knowledge tells me that i don't need acceleration to do this question
because this is about "before" applying the break.

If Dick's reply isn't enough, your logic is right to me, simple enough. I don't see how it doesn't "look correct".
 
Dick said:
You "know" what you did is right. Resist the temptation to complicate it. I'm sure you'll get a chance to use that other stuff later.

Siracuse said:
If Dick's reply isn't enough, your logic is right to me, simple enough. I don't see how it doesn't "look correct".

Thank you, I really appreciate it! :)
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top