Solving Monkey Swing Physics Problem

  • Thread starter Thread starter Hothot330
  • Start date Start date
  • Tags Tags
    Physics Swing
AI Thread Summary
The discussion revolves around a physics problem involving a monkey swinging from two vines. The monkey initially hangs at rest, and upon releasing one vine, it swings on the other. Participants suggest using conservation of energy to determine the speed at the lowest point of the swing and discuss the need to calculate the height difference for potential energy. Tension in the remaining vine is also a key focus, with participants confirming the inclusion of the monkey's weight in calculations. The conversation emphasizes the importance of energy conservation principles in solving the problem effectively.
Hothot330
Messages
11
Reaction score
0

Homework Statement


http://img256.imageshack.us/my.php?image=b911om5.jpg

sin30= .50 sin60= .87
cos30= .87 cos60= .50
tan30= .58 tan60= 1.73

A 5.0 kilogram monkey hangs initially at rest from two vines. A and B, as shown above. Each of the vines has length 10 meters and negligible mass.

For parts c and d:
The monkey releases vine A and swings on vine B. Neglect air resistance.
c. Determine the speed of the money as it pass through the lowest point of it's first swing.

d. Determine the tension in vine B as the monkey passes through the lowest point of its first swing.

Homework Equations


Centripetal force? m(v^2/r)


The Attempt at a Solution



Completed parts a and b. Force diagram and tensions in each vine before release. T1= 9N and T2= 5.13N

I'm not sure as what I am to do... I'm thinking that it has something to do with centripetal force but not sure cause he is swinging.
 
Physics news on Phys.org
Part C - the easiest way is probably conservation of energy.
Calculate the difference in height between it's initial position and the position when the vine is at it's lowest point. PE = m g h and KE = 1/2 m v^2

Part D - don't forget you also have the weight of the monkey.
 
that makes sense, thanks for the tip. Never would have thought to use conservation of energy.
 
Hothot330 said:
Never would have thought to use conservation of energy.
It's always a good bet - it can't necessarily answer all questions (part D for instance) but when it's right it's right! And is generally simple, you don't have to worry about angles and vectors etc.
 
ahh but how do you calculate the height? Are you sure the tension in both a and b are correct hothot?
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top