Solving Nano Tio2 in Water: Challenges and Solutions

  • Thread starter Thread starter dana3kil
  • Start date Start date
  • Tags Tags
    Nano Water
AI Thread Summary
Nano TiO2 is insoluble in water, contrary to some papers suggesting otherwise, which may confuse dissolution with dispersion. Achieving a stable dispersion requires the use of dispersants, as simply dissolving TiO2 is not feasible. For homogeneous composites, a stable suspension is essential, but nanosized particles can agglomerate even in well-dispersed solutions. Alternative methods like sol-gel or polymerized complex techniques can enhance homogeneity in nanocomposites. Consulting specialized literature on ceramic materials or composite processing is recommended for more effective solutions.
dana3kil
Messages
2
Reaction score
0
Hi every one .
I am trying to make nanocomposite and I need to solve nano Tio2 in water
many paper said that it will dissolve in water
but I could not .
I don not know what is the problem :cry:
 
Engineering news on Phys.org
TiO2 is insoluble in water. If 'many paper' say it is, they are either wrong or there is some procedure which is used and you are not picking up on it.

http://en.wikipedia.org/wiki/Titanium_dioxide

This article says nanotubes of TiO2 are prepared using either a strong NaOH solution or a dilute HF solution.
 
"Dissolve" and sometimes "solve" is often used as a synonym of disperse. So if you mean that you are unable to obtain a stable dispersion of your nanopowder, you should try adding a dispersant.
 
Thank you
but in case of using a solvent how can I get rid of it . (water will evaporate )
and will dispersion give me homogeneous composite or I need to dissolve the material
 
As already said, TiO2 is insoluble in water in the sense of decomposing into free ions. However, with sufficiently small particles and appropriate dispersants you can obtain relatively stable suspensions. In the case of very small particles, i.e. nanosized ones the suspension is called colloidal solution. In order to obtain a homogeneous composite you need to obtain a homogeneous and stable suspension of your TiO2 and whatever other materials are to from the composite with the aid of a dispersant (also called defloculant sometimes). However, this approach is not very adequate for achieving homogeneity on the nanoscale since the nanoparticles easily flock together even in very well defloculated suspensions. For nanocomposites there are other methods for achieving high homogeneity such as sol-gel, polymerized complex, etc. I recommend you to go to the library and find a specialized book on ceramic materials or composites processing. Also check carefully if a synthesis procedure hasn't already been developed. There is a high probability there are publications describing it.
 
Back
Top