Solving Physics Vector Problems: Adding, Subtracting, and Finding Equilibrium

  • Thread starter Thread starter kittykatxox
  • Start date Start date
  • Tags Tags
    Physics Vector
AI Thread Summary
The discussion revolves around solving a physics vector problem involving two vectors, a and b. The user successfully computed the results for a + b and a - b but is struggling with finding a third vector c that satisfies the equation a - b + c = 0. It is clarified that vector c should be the negative of the result from a - b, effectively canceling it out to achieve equilibrium. The user expresses gratitude for the clarification and indicates understanding of the solution.
kittykatxox
Messages
7
Reaction score
0
I am having trouble with this problem I have solved most of it it is just the last part I don't understand.

Problem:
Two vectors are given by

a= ( 4.0 m)i - (3.0 m)j + (1.0 m) k



and

b= (-1.0 m)i + (1.0 m)j + (4.0 m)k


In unit-vector notation, find (a) a + b, (b)a - b, and (c) a third vector c such that a - b + c = 0.

the answers I got for letters a) and b)

a) (3.0 m)i + (-2.0 m)j + (5.0 m) k

b) (5.0 m)i + (-4.0 m) j + (-3.0 m) k

c) ?

I need help with letter c) please :)

Thanks :)
 
Physics news on Phys.org
kittykatxox said:
I am having trouble with this problem I have solved most of it it is just the last part I don't understand.

Problem:
Two vectors are given by

a= ( 4.0 m)i - (3.0 m)j + (1.0 m) k



and

b= (-1.0 m)i + (1.0 m)j + (4.0 m)k


In unit-vector notation, find (a) a + b, (b)a - b, and (c) a third vector c such that a - b + c = 0.

the answers I got for letters a) and b)

a) (3.0 m)i + (-2.0 m)j + (5.0 m) k

b) (5.0 m)i + (-4.0 m) j + (-3.0 m) k

c) ?

I need help with letter c) please :)

Thanks :)
You already solved a - b correctly in part (b), so now you want to find a vector c to cancel that out.
 
there is no vector c though?
 
You are asked to find a vector c such that when it is added to the vector (a -b), you get 0.
 
thank you I understand now! thanks for the help!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top