Solving Sound Waves Problem: Distance of Explosion from Ground Vibration

AI Thread Summary
To determine the distance of the explosion, the problem involves calculating the time difference between sound traveling through the ground and through the air. The speed of sound in air is 342 m/s, while in the ground it is 6.75 km/s. Given that the ground vibration is felt 74 seconds before the sound is heard, this time difference can be used to set up an equation relating the distances traveled by sound in both mediums. By solving this equation, the distance to the explosion can be accurately calculated. The approach emphasizes understanding the relationship between time, speed, and distance in different mediums.
moronto
Messages
5
Reaction score
0

Homework Statement


The speed of sound along the ground is about 6.75 km/s while the speed of sound in air is 342 m/s. A very powerful explosion occurs some distance away and you feel the ground vibrate 74.0 seconds before you hear the sound of the explosion. How far away is the explosion?


Homework Equations


d = vt


The Attempt at a Solution


Not really sure how to approach this properly. There is a hint that says: "The difference in the travel times is the time given. "
 
Physics news on Phys.org
You should set up a single variable equality using air time and ground time.
 
ah, i got it, thanks
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is（Figure 2）： F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Sound waves affected by wind/sound waves in materials
Replies
13
Views
2K
Audio interference of sound waves from two speakers
Replies
19
Views
4K
Sound Wave Problem -- time of flight in air versus in water
Replies
13
Views
3K
Sound Wave Interference and Finding the Path Differences with Diagrams
Replies
20
Views
5K
Solving for Time to Reach Ground: Calculating Velocity of Sound over 50m
Replies
2
Views
2K
Sound waves in carbon dioxide -- I think book answer is *wrong*
Replies
24
Views
11K
Sound Waves in Different Mediums
Replies
3
Views
2K
How to solve this sound problem (minimum sampling rate required)
Replies
3
Views
2K
Frequency of sound waves from vibrating wire
Replies
6
Views
2K
Sound Wave Problem: Frequency of Note in Amphitheater
Replies
6
Views
7K

Hot Threads

Recent Insights

Back
Top