Tangential and Radial components of acceleration and tension

AI Thread Summary
The discussion focuses on a physics problem involving a 0.500 kg object swinging in a vertical circle with a radius of 2.00 m at a 20-degree angle and a speed of 8.00 m/s. The calculations for tension in the string, tangential and radial components of acceleration, and total acceleration were derived, resulting in a tension of 20.6 N and a total acceleration of 32.2 m/s². It was clarified that the direction of motion does not affect the magnitudes of tension and accelerations, as they remain constant regardless of whether the object swings up or down. The solution was confirmed as correct by other participants in the discussion.
Eohlas
Messages
8
Reaction score
0

Homework Statement


One end of a cord is fixed and a small 0.500 kg object is attached to the other end, where it swings in a section of a vertical circle of radius 2.00 m as shown. (I don't have access to a camera right now, apologies.) When the angle is 20.0 degrees, the speed of the object is 8.00 m/s. At this instant, find (a) the tension in the string, (b) the tangential and radial components of acceleration, and (c) the total acceleration. (d)Is the answer to this question changed if the object is swinging down toward its lowest point instead of swinging up? Explain.

Known data:
mass is 0.500 kg
Radius is 2.00
Angle is 20.0 degrees
Speed of object when it is 20.0 degrees to the right of the vertical is 8.00 m/s


Homework Equations


Radial acceleration = (V2)/radius)
mg = 4.9N
mgsinθ = 1.68 N
mgcosθ = 4.60 N



The Attempt at a Solution


I solved it earlier today, but now that I've taken a second look, I'm starting to think I didn't solve it correctly.

I set up the equations of motion for both the y and x components. (I've set up the coordinate system so the y-axis is along the cord)
ƩFy: T - mgcosθ - mar = 0 (originally, I did not include the centripetal force)
ƩFx: -mgsinθ= -ma (the force is acting on the object in the opposite direction)
A) Find tension in the cord
T = mgcosθ + mar

Ar is V2/R so, (8.00^2)/2.00 --> 32.0 m/s^2 ( seems excessive to me)
T = mgcosθ + mar --> 4.60N + 16.0N = 20.6N

B) Find tangential and radial components of acceleration

Already found Ar in part A. I think tangential acceleration is obtained from -mgsinθ = -ma, which when I cancel out the mass, is -gsinθ= -a which yields -3.35 m/s^2.

C) the total acceleration is √( (Atangential)2 + Ar2) ) which yields 32.2 m/s^2

D) The answers to the previous questions will not change if the object was swinging in the opposite direction, because the magnitudes of the tension, radial acceleration, and tangential acceleration would still be the same. In other words, they are independent of the direction of motion.

Thank you for taking the time to read this.
 
Physics news on Phys.org
Eohlas said:

Homework Statement


One end of a cord is fixed and a small 0.500 kg object is attached to the other end, where it swings in a section of a vertical circle of radius 2.00 m as shown. (I don't have access to a camera right now, apologies.) When the angle is 20.0 degrees, the speed of the object is 8.00 m/s. At this instant, find (a) the tension in the string, (b) the tangential and radial components of acceleration, and (c) the total acceleration. (d)Is the answer to this question changed if the object is swinging down toward its lowest point instead of swinging up? Explain.

Known data:
mass is 0.500 kg
Radius is 2.00
Angle is 20.0 degrees
Speed of object when it is 20.0 degrees to the right of the vertical is 8.00 m/s


Homework Equations


Radial acceleration = (V2)/radius)
mg = 4.9N
mgsinθ = 1.68 N
mgcosθ = 4.60 N



The Attempt at a Solution


I solved it earlier today, but now that I've taken a second look, I'm starting to think I didn't solve it correctly.

I set up the equations of motion for both the y and x components. (I've set up the coordinate system so the y-axis is along the cord)
ƩFy: T - mgcosθ - mar = 0 (originally, I did not include the centripetal force)
ƩFx: -mgsinθ= -ma (the force is acting on the object in the opposite direction)
A) Find tension in the cord
T = mgcosθ + mar

Ar is V2/R so, (8.00^2)/2.00 --> 32.0 m/s^2 ( seems excessive to me)
T = mgcosθ + mar --> 4.60N + 16.0N = 20.6N

B) Find tangential and radial components of acceleration

Already found Ar in part A. I think tangential acceleration is obtained from -mgsinθ = -ma, which when I cancel out the mass, is -gsinθ= -a which yields -3.35 m/s^2.

C) the total acceleration is √( (Atangential)2 + Ar2) ) which yields 32.2 m/s^2

D) The answers to the previous questions will not change if the object was swinging in the opposite direction, because the magnitudes of the tension, radial acceleration, and tangential acceleration would still be the same. In other words, they are independent of the direction of motion.

Thank you for taking the time to read this.

Welcome to PF, Eohlas!

Your solution is correct.

ehild
 
Thanks for the welcome, although I actually registered almost two years ago. Heh. And thanks for taking the time to check my solution. :)
 
Eohlas said:
Thanks for the welcome, although I actually registered almost two years ago. Heh. :)

I saw that this was your first post. Was it? You came out from hide-out just now. .:smile:
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top