Tension and Normal Force in a Moving Elevator

AI Thread Summary
In a scenario where a 5.0 kg mass is suspended in a decelerating elevator, the normal force is calculated as Fn=mg, resulting in 49 N. The elevator's upward motion is decreasing at a rate of 2.0 m/s², introducing an additional force due to negative acceleration. To find the tension in the string, the total force is calculated as f_total = 49 N - (5 kg * 2 m/s²), leading to a tension of 39 N. The approach combines the effects of gravity and the elevator's deceleration to determine the tension accurately. Understanding these forces is crucial for solving similar physics problems involving moving systems.
patelkey
Messages
16
Reaction score
0
A 5.0 kg mass is suspended by a string from the ceiling of an elevator that
is moving upward with a speed which is decreasing at a constant rate of 2.0
m/s in each second. What is the tension in the string supporting the mass?

-I know that the Normal Force on the string is Fn=mg so it would be equal to 49 N, however how would I use the rest of the information to calculate the tension in the string. I know that the answer is supposed to be 39 N but I don't know how to approach it from this point.
 
Physics news on Phys.org
2.0 m/s/s means that there is an additional force caused by the deceleration of the elevator (negative acceleration), and F=ma. Therefore f_total = 49N - 5kg*(2m/s^2) = 39N
 
okk that's what I was thinking but I felt as if it was just a guess that happened to work out thanks for the explanation
 
Thread 'Is 'Velocity of Transport' a Recognized Term in English Mechanics Literature?'

Thread 'Is 'Velocity of Transport' a Recognized Term in English Mechanics Literature?'

Here are two fragments from Banach's monograph in Mechanics I have never seen the term <<velocity of transport>> in English texts. Actually I have never seen this term being named somehow in English. This term has a name in Russian books. I looked through the original Banach's text in Polish and there is a Polish name for this term. It is a little bit surprising that the Polish name differs from the Russian one and also differs from this English translation. My question is: Is there...
View full post »
Thread 'Beam on an inclined plane'

Thread 'Beam on an inclined plane'

Hello! I have a question regarding a beam on an inclined plane. I was considering a beam resting on two supports attached to an inclined plane. I was almost sure that the lower support must be more loaded. My imagination about this problem is shown in the picture below. Here is how I wrote the condition of equilibrium forces: $$ \begin{cases} F_{g\parallel}=F_{t1}+F_{t2}, \\ F_{g\perp}=F_{r1}+F_{r2} \end{cases}. $$ On the other hand...
View full post »

Similar threads

I Translational force of a pulley
Replies
27
Views
2K
What is the free-body diagram for a massless pulley in free fall?
Replies
31
Views
4K
I Mass of Backpack in Moving Elevator
Replies
10
Views
2K
I Why don't we "fly up" in an accelerating elevator?
Replies
11
Views
4K
B What is the Absolute Value of the Normal force on a block on this wedge?
Replies
3
Views
1K
B Rotational Dynamics: Confused about the tension in this string pulling a mass up an incline
Replies
2
Views
1K
Normal force of real pulley: Which direction is it?
Replies
22
Views
7K
I Understanding tension and centripedal force in a puck and weight
Replies
4
Views
2K
B Normal Force Discrepancy for Wedge Vs. Ramp
Replies
9
Views
3K
B What is tension and how does it affect a rope?
Replies
2
Views
2K

Hot Threads

Recent Insights

Back
Top