Tension in legs of an insect dangling upside down

  • Thread starter Thread starter coffeebird
  • Start date Start date
  • Tags Tags
    Insect Tension
AI Thread Summary
Insects can hang from horizontal rods using their legs, which experience tension due to their weight. The tension in each leg, or tibia, can be calculated using the formula T = mg/(6 sinθ), where θ is the angle of the legs. For an angle of 40°, the ratio of tension in each tibia to the insect's weight is approximately 0.259. If the insect straightens its legs, the angle θ increases, leading to a decrease in tension in the tibias. Understanding the forces involved requires a good free-body diagram to visualize the tension distribution.
coffeebird
Messages
15
Reaction score
0

Homework Statement


Some insects can walk below a thin rod (such as a twig) by hanging from it. Suppose that such an insect has mass m and hangs from a horizontal rod as shown in Fig. 5-35, with angle θ = 40°. Its six legs are all under the same tension, and the leg sections nearest the body are horizontal. (a) What is the ratio of the tension in each tibia (forepart of a leg) to the insect's weight? (b) If the insect straightens out its legs somewhat, does the tension in each tibia increase, decrease, or stay the same?

Homework Equations



F=ma

The Attempt at a Solution

weight = 9.8 m = tension on one leg = 9.8/6 m

tension in all tibias = (9.8mcos40)^2 + (9.8sin40)^2

tension in all femurs= 9.8cos40=7.51m

in answer to (b), the tension in the tibias would decrease because the tension in the femurs would increase
 

Attachments

  • problem16.gif
    problem16.gif
    2.9 KB · Views: 1,153
Last edited:
Physics news on Phys.org
Hello, coffeebird.

coffeebird said:
weight = 9.8 m = tension on one leg = 9.8/6 m

Did you really want to claim that the weight of the bug equals the tension in one leg? Or, are you claiming that the tension in one leg equals 1/6 the weight of the bug? Either way, you would need to justify that.

It might help to relate this problem to the more standard problem of finding the tension in two cords that support a hanging sign, as shown in the attached figure. The key to working problems like this is to draw a good free-body diagram of the sign. Likewise, for the bug, draw a free-body diagram of the bug treating the tibias as "cords" supporting the bug.
 

Attachments

  • H-bar.jpg
    H-bar.jpg
    2.8 KB · Views: 992
(a) There are six legs, and the vertical component of the tension force in each leg is
T sinθ where θ = 40° . For vertical equilibrium (zero acceleration in the y direction) then by
Newton’s second law
6T sinθ= mg
∴ T = mg/6 sinθ
∴ the ratio becomes T/mg ≈ 0.259
(b) The angle θ is measured from horizontal, so as the insect “straightens out the legs” θ
will increase (getting closer to 90° ), which causes sinθ to increase (getting closer to 1)
and consequently (since sinθ is in the denominator) causes T to decrease.
 
thank you, i get it now
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top