Tension on a Massive Rope: How to Calculate Tension at Different Points

  • Thread starter Thread starter SakuRERE
  • Start date Start date
  • Tags Tags
    Rope Tension
AI Thread Summary
The discussion revolves around calculating the tension in a rope system lifted by a force of 9.0 N, with a total mass of 0.3 kg (including two blocks and the rope). The initial calculations for acceleration were incorrect, with participants realizing that gravity must be considered, leading to a corrected acceleration of 20 m/s². The tension at the top of the rope was recalculated using the correct mass and acceleration, while the tension at the bottom of one-fifth of the rope was also discussed, emphasizing the importance of accounting for the weight of the rope and blocks. Overall, the conversation highlights the application of Newton's second law in solving the problem.
SakuRERE
Messages
68
Reaction score
5

Homework Statement


A system, consisting of a wide rope of mass 0.10 kg between two blocks each of mass 0.10 kg, is lifted by an applied force F = 9.0 N (Fig. 4 below). (a) Find the acceleration of the system. Find the tension at (b) the top of the rope, and (c) the bottom of one-fifth of the rope. Take g = 10 m/s2.
upload_2018-10-14_19-22-19.png

Homework Equations


Fnet=ma

The Attempt at a Solution


a) Fnet=ma
F- 3mg = ma
9- 3(0.1)(10) = 0.1a
6=0.1 a
a= 60 m/s^2

b) T- 2mg = ma
T-2(0.10)(10) = 0.10(60) (it's right to use the mass of rope by acceleration right?)
T-2=66
Ttop= 68N
is it right?

c) T- (4/5x m)- 10xm= (4/5)m x a
T- 0.08(10) - (0.10)(10)= 0.08(60) is this equation right
i don't if i got (the bottom of one-fifth of the rope) correctly or not. i considered the tension to equal to that part of the rope below 1/5 from the mass so that m of rope now is 4/5m
and also i have the lower mass (m). so is it right??
 

Attachments

  • upload_2018-10-14_19-22-19.png
    upload_2018-10-14_19-22-19.png
    4.5 KB · Views: 919
Physics news on Phys.org
SakuRERE said:
a) Fnet=ma
F- 3mg = ma
9- 3(0.1)(10) = 0.1a
6=0.1 a
a= 60 m/s^2

Doesn't that seem a bit high to you?

SakuRERE said:
b) T- 2mg = ma
T-2(0.10)(10) = 0.10(60) (it's right to use the mass of rope by acceleration right?)
T-2=66
Ttop= 68N
is it right?

You have a ##9N## force and a tension of ##68N## Does that makes sense?
 
  • Like
Likes SakuRERE
PeroK said:
Doesn't that seem a bit high to you?
You have a ##9N## force and a tension of ##68N## Does that makes sense?
it does, that's why I am asking here. i get number that are too big
 
SakuRERE said:
it does, that's why I am asking here. i get number that are too big

What is the mass of your system?

What is the net external force on your system?

What is the acceleration of your system?
 
PeroK said:
What is the mass of your system?
the total mass is 3(0.10) the two blocks and the rope
fnet is 9N
the acceleration... do you mean it should be F- 3(mg)=3ma?
 
SakuRERE said:
the total mass is 3(0.10) the two blocks and the rope

If you mean: The total mass is ##0.3kg##, then yes.

SakuRERE said:
fnet is 9N

What about gravity?

SakuRERE said:
the acceleration... do you mean it should be F- 3(mg)=3ma?

I didn't mean anything. I just asked a question!
 
PeroK said:
What about gravity?
the gravity force is down and each mass including the rope will have a weight downward.
PeroK said:
I didn't mean anything. I just asked a question!
Oh yeah, i am just trying to reach the solution fast :)
 
SakuRERE said:
the gravity force is down and each mass including the rope will have a weight downward.

Exactly, so you need to take gravity into account when calculating the external force on your system.
 
i JUst checked again my solution and i must have put 3m in a)
F-3mg= (3M)a
right? so a=20

and regarding the b) it would be
T-2mg=2ma
right?

and for c)
it would be
T-(1/5x0.10)g - 0.10g = (1/5x0.10+ 0.10) (20)
right?
 
  • #10
SakuRERE said:
i JUst checked again my solution and i must have put 3m in a)
F-3mg= (3M)a
right? so a=20

20 what? Units are important.

SakuRERE said:
and regarding the b) it would be
T-2mg=2ma
right?

That's the idea. It's called Newton's 2nd Law!
 
  • Like
Likes SakuRERE
  • #11
PeroK said:
20 what? Units are important.
a= 20 m/s^2

so it's right and i am done with it right?
 
  • #12
SakuRERE said:
a= 20 m/s^2

so it's right and i am done with it right?

You just have to calcuate the tension.
 
  • Like
Likes SakuRERE

Similar threads

Replies
38
Views
4K
Replies
25
Views
5K
Replies
14
Views
3K
Replies
10
Views
3K
Replies
16
Views
7K
Replies
8
Views
8K
Replies
18
Views
2K
Back
Top