This problem is driving me crazy

  • Thread starter Thread starter bossalinie786
  • Start date Start date
AI Thread Summary
The homework problem involves calculating the work done on a cart by a rope inclined at 28.5 degrees while moving on a horizontal surface. The key point is that the force from the rope has both x and y components, with only the x component contributing to the work done. The correct formula for work is W = F(cos theta) * d, where the angle affects the force applied in the direction of movement. There is confusion regarding the friction force and its relationship to the weight of the cart, which needs clarification. Understanding these components is essential for solving the problem accurately.
bossalinie786
Messages
1
Reaction score
0
this is one of my homework problems, i have attempted it twice, and the website i submit my homework to tells me it is wrong, here is the question,

A cart loaded with bricks has a total mass of 16.9 kg and is pulled at constant speed by a rope. The rope is inclined at 28.5 degrees above the horizontal and the cart moves 22.2 m on a horizontal surface. The coefficient of kinetic friction between ground and
cart is 0793.
The acceleration of gravity is 9.8 m/s2 :
How much work is done on the cart by the
rope? Answer in units of J.


since the rope is pulling is cart, and the force and the direction of the work are both going in the direction, then the angle(theta) would be zero? therefore only the x component of the force is needed, i have calculated the Friction Force which to my understand is the same as the force of the weight pulled. then i simply plug it into teh equation W=F*d and I'm not getting it right, can anyone help, it would be appreciated
 
Physics news on Phys.org
Care to show some of your work so far?

cookiemonster
 
The force of the rope and the work done by the rope are not pointing the same direction. According to the problem, the rope is inclined 28.5 degrees above the horizon and therefore has both an x and y component. The x component of the rope's force (cosine theta) is what points in the same direction as the work. W = F(cos theta)s
 
Originally posted by bossalinie786
The rope is inclined at 28.5 degrees above the horizontal ...
...
... the Friction Force ... to my understand is the same as the force of the weight pulled.
Or is it?
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top