Transform Vectors to Spherical Coordinates at P (-3,2,4)

AI Thread Summary
The discussion focuses on transforming vectors to spherical coordinates at the point P (-3, 2, 4). The user outlines the relationships between Cartesian coordinates (x, y, z) and spherical coordinates (r, θ, φ), expressing the need to find these angles and the radius. They attempt to convert the vector 10ax into spherical components but seek clarification on the calculations and the correct approach. Additionally, the user expresses a desire for a more objective solution and inquires about deleting their post. The conversation highlights the complexities of coordinate transformation and the need for precise mathematical methods.
Dong Hoon Lee
Messages
4
Reaction score
0
The problem is

<< transform the following vectors to spherical coordinates at the points given

10ax at P (x = -3 , y = 2, z=4)>>

Actually, My first language isn't English, please understand that.

x y z can be chage into x = rsinθcosφ , y=rsinθsinφ , z=cosθ


ax vector can be expressed ar,aθ,aφ so, I can change x , y, z

therefore we have to find θ, φ, r

also, we can know the sinθcosφ = x/r sinθsinφ = y/r z=cosθ



10ax = 10ax ar + 10ax aθ + 10ax aφ

= 10sinθcosφ + 10cosθcosφ - 10sinφ



>>>> I can fill out innerproduct between x and r but how to solve the others,

Is it right answer? I want to find more correctly one (it make lots of number, because find each variables through lots of calculation)



>>>> I want to more objective soultion !
 
Engineering news on Phys.org
I want to know how to chage between sehperical coordinates and cartesian coordinates
 
I am sorry that I posted wrong forum,,, how can i erase my post?
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top