What Is the Black Circular Object on My Circuit Board?

  • Thread starter Thread starter overlook1977
  • Start date Start date
  • Tags Tags
    Board Circuit
AI Thread Summary
The black circular object on the circuit board of the Staples Easy button toy is identified as a chip that stores the digital recording of the voice that activates when the button is pressed. This technique is known as "Chip On Board," where the integrated circuit (IC) is directly attached to the circuit board and covered with black epoxy for cost-effectiveness. The circuit board also includes a resistor, capacitor, button, speaker, and battery. The discussion confirms that the circular object is indeed a chip, emphasizing its simplicity in function. Understanding this technology reveals how inexpensive components can create interactive toys.
overlook1977
Messages
11
Reaction score
0
I took apart a Staples Easy button toy to see how it worked. Its very simple; attached to a circuit board there is a resistor, a capacitor, a button, and a circular black object that looks like a glob. The board is attached to a speaker and battery. So, something is telling this toy to say "That was Easy" when the circuit is closed, so I am guessing there is a microchip embedded in that odd circular black object. Is this indeed the chip, and if so does anyone know what this black thing/technique is called? Below is a link to a picture of the circuitboard. The object in question is at the top left.

http://www.flickr.com/photos/tommybear/119944332/in/set-72057594093761486/
 
Engineering news on Phys.org
The Blob is a chip where they keep the digital recording of the voice that you here when the button is pressed.

The technique is called "Chip On Board"
Where the IC is attached direct to a circuit board and wires from the IC connect directly to PCB. The chip is then covered with black epoxy. They do this because it is cheap.
 
That's just a chip or an intergrated circuit. Not much to learn how it works these days, heh.
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Thread 'Beauty of old electrical and measuring things, etc.'
Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
Back
Top