Understanding Conventional Current and the Right Hand Rule for B-Field Direction

  • Thread starter Thread starter learning_phys
  • Start date Start date
  • Tags Tags
    Current
AI Thread Summary
Conventional current is defined as flowing from negative to positive, while voltage flows from positive to negative. The right-hand rule is used to determine the direction of the magnetic field (B-field) in relation to current flow. Current in a circuit typically flows from positive to negative voltage, except within a voltage source. Voltage itself is a static quantity in time-invariant circuits and does not "flow." Understanding these distinctions is crucial for grasping electrical circuit concepts.
learning_phys
Messages
74
Reaction score
0
My text shows current flowing from negative to positive, and also uses the right hand rule to get the B-field this way. I always thought convention was to flow from positive to negative, and also the b-field followed this convention as well. Any comments?
 
Physics news on Phys.org
As I recall, the convention is that current will flow from negative to positive while potential (voltage) will flow from positive from negative.
 
Current always flows from positive to negative voltage, unless it's within a voltage source. And voltage (or potential) doesn't "flow" at all. It's a fixed quantity in time-invariant circuits.
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »
Thread 'A bead-mass oscillatory system problem'

Thread 'A bead-mass oscillatory system problem'

I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
View full post »

Similar threads

Question on magnetism: Circular motion of charged particle in a Magnetic Field
Replies
34
Views
1K
Direction of current as bar magnet moves uniformly through copper ring
Replies
3
Views
1K
How does an eddy current brake work exactly?
Replies
2
Views
2K
Right Hand Rule & Conventional Current: What is Correct?
Replies
9
Views
2K
Connecting a number of EMF sources in a circle to form a circuit
Replies
9
Views
1K
Fleming's left and right hand rule - how do they work?
Replies
8
Views
3K
Right-Hand Rule: Finding Induced Direction in a One Loop Wire on the Page
Replies
5
Views
2K
Magnetic field generated by an infinitely long current-carrying wire
Replies
43
Views
4K
Direction of the magnetic needle
Replies
11
Views
2K
Confusion over acceleration of gravity as positive/negative
Replies
10
Views
1K

Hot Threads

Recent Insights

Back
Top