Unintended Car Acceleration: Causes and Recalls Explained

  • Thread starter Thread starter Infiniti_m35
  • Start date Start date
AI Thread Summary
Unintended car acceleration can occur due to various mechanical and electronic issues, including faulty throttle controls, software glitches, or driver error. Recent recalls, particularly involving Toyota vehicles, highlight concerns over safety and reliability in automotive design. The discussion emphasizes the importance of understanding existing research and information before seeking further insights. Participants encourage sharing specific sources to facilitate a more informed dialogue. Overall, the conversation underscores the need for thorough research in automotive mechanics.
Infiniti_m35
Messages
1
Reaction score
0
I'm doing a little research on automotive mechanic stuffs. Anyways, my question is, why do cars accelerate suddenly? What causes it to accelerate unintentionally? You've seen the recent recalls on Toyotas about the unintentional accelerations. I just want to know more about it. So, tell me what you guys think? Thanks a lot.
 
Engineering news on Phys.org
Infiniti_m35 said:
I'm doing a little research on automotive mechanic stuffs. Anyways, my question is, why do cars accelerate suddenly? What causes it to accelerate unintentionally? You've seen the recent recalls on Toyotas about the unintentional accelerations. I just want to know more about it. So, tell me what you guys think? Thanks a lot.
You're aware that you've posted this in the "Beyond the Standard Model" forum, correct? Last I checked, Toyotas were well described using conventional mechanics!
 
Infiniti_m35 said:
I'm doing a little research on automotive mechanic stuffs. Anyways, my question is, why do cars accelerate suddenly? What causes it to accelerate unintentionally? You've seen the recent recalls on Toyotas about the unintentional accelerations. I just want to know more about it. So, tell me what you guys think? Thanks a lot.

Looks like it got moved to a better forum.

Welcome to the PF. Well, we prefer here for you to tell us what you know, instead of asking us to spend lots of time posting all kinds of stuff that you should be able to find on your own. We are happy to answer questions about things that you've read that you don't understand, but we prefer not to spend cycles on things that are easy to find via Google and Wikipedia.org, etc.

So, what links can you show us to things that you've read already? And what exactly do you not understans about info in those links?
 
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
Back
Top