Velocity and acceleration of a train

AI Thread Summary
A train traveling south at 60 m/s reverses direction to travel north at the same speed, resulting in a total change in velocity of 120 m/s due to the change in direction. The calculation involves considering the initial velocity as -60 m/s (south) and the final velocity as 60 m/s (north), leading to a change of 60 - (-60) = 120 m/s. The average acceleration during the 2-second reversal is discussed, with the correct interpretation being that acceleration can be negative depending on the defined axis. The average acceleration is calculated as 60 m/s², but it is noted that negative acceleration can also occur if the axis is defined differently. Understanding these concepts is crucial for accurately analyzing motion in physics.
honey1060
Messages
3
Reaction score
0
A train travels due south at 60 m/s. It reverses its direction and travels due north at 60 m/s. What is the change in velocity of the train? Whats the average acceleration if it took 2 sec. to reverse.
 
Physics news on Phys.org
Welcome to the forum...the rules state you need to show some work for us to help you. If the train went from 60m/s south to a stop what would the change in velocity be?
 
60 m/s and since it goes back north would the velocity not change?
 
well it would change. it would change another 60 m/s. making the total 120 m/s. the overall speed did not change, but velicity has a direction and since the direction changed completely oposite the total velocity change would be 120m/s in the north direction. Think of an axis that represents velicity either north or south (north being positive south being negative). Originally you are at -60 (since your velocity is southbound). When you are done you are at 60 (since your velocity is northbound). Therefore the change in velocity is 60-(-60) = 120 m/s.
 
Last edited:
ok now i got it. So if it took 2 sec. to reverse the average velocity would be -60-60/2 and since acceration is always positive it would be 60 m/s squared?
 
the answer is correct, but you can have negative acceleration. it just depends on how you define your axis. Negavie acceleration can be thought of as slowing down and then going in reverse, but again, that's assuming your axis was defined as positive in the direction you were going in. I would report it as the 60 m/s^2
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top