What Are Emission and Absorption in Physics?

AI Thread Summary
Emission refers to the process where a substance emits light of specific colors when heated, resulting in an emission spectrum, while absorption occurs when light passes through a substance and certain wavelengths are absorbed, creating an absorption spectrum. The emitted light's colors are determined by the electron arrangement in the atoms of the substance. Emission spectra can be observed in neon lights and fireworks, while absorption spectra require precise instruments to detect missing colors from white light after passing through a gas. The discussion clarifies that emission involves hot substances glowing in their characteristic spectrum, whereas absorption involves cooler substances absorbing light. Understanding these concepts is crucial for studying the behavior of light and matter in physics.
J-Girl
Messages
38
Reaction score
0
emission and absorption?? confused!

hiii, I am just wondering if anybody can give me a very simple definition of each of the two terms, and what the main difference is. Is emission when a wave enters a denser medium (from air to water)? and absorption when a wave enters a medium of lower refractive index number?- just a guess lol, but anyways, would really appreciate some input!:)
 
Physics news on Phys.org


Are you talking about emission and absorption spectra?
 


sorry i should have specified, yes emission and absorption spectra. not stated clearly in my book and I am spose to learn this! i just can't find a good definition on the internet
 


A google search will turn up more explanations, and better ones, than you'll get on PF.

But I'll give a brief explanation to get you going. If you heat the vapours of some substances, the vapour emits light of characteristic colour/s, the exact colour being determined by the arrangement of the electrons in the atoms of the particular elements in that substance. This emitted light is the emission spectrum, and you can see it in things such as neon lights, or coloured fireworks, or school science lab experiments, and even your kitchen gas stove.

An alternative arrangement is to shine white light through the gaseous state of a substance, and use precison optical instruments to examine the light that passes through. You will find some of the individual colours that were in the white light have gone missing, or are at least reduced, because they have been absorbed by the atoms in the vapour. This is the absorption spectra. You need something better than an untrained naked eye to see this effect. Again, the colours that go missing are characteristic of the elements in that vapour.

To excite a substance to the point that it glows and emits light, it is sprayed into a gas flame.
 
Last edited:


Yeah, if you're talking about spectra.
Emission sprectra is when something hot glows in it own characteristic spectrum.
Absorption is when something cold absorbs (ideally white) light in its own characteristic spectrum.
 


DaveC426913 said:
Absorption is when something cold absorbs (ideally white) light
Yes, that's a good point. A gas, but not heated, not necessarily, anyway. I'll amend what I wrote.
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is（Figure 2）： F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Understanding Radio Waves & Oxygen Absorption at 60GHz
Replies
1
Views
2K
I Assumptions for blackbody spectra vs. emission spectra vs. absorption spectra
Replies
8
Views
4K
I Do you think emissivity of air makes sense?
Replies
16
Views
4K
Some multiple choice questions.
Replies
2
Views
1K
Debugging a Kelvin Water Dropper
Replies
10
Views
1K
I How Can Quantum Optics Model Gradually Varying Loss in Optical Media?
Replies
1
Views
2K
Understanding Real-World Emission Spectra: Are Solids Similar to Blackbodies?
Replies
2
Views
4K
What Are the Rules for Electron Absorption and Emission in Atoms?
Replies
3
Views
4K
Confused about magnesium's and calcium's emission spectra
Replies
3
Views
4K
Dependence of index of refraction on frequency
Replies
15
Views
3K

Hot Threads

Recent Insights

Back
Top